lkml.org 
[lkml]   [2014]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v4] devicetree: Add generic IOMMU device tree bindings
    On 7/13/2014 4:43 AM, Rob Clark wrote:
    > On Sun, Jul 13, 2014 at 5:43 AM, Will Deacon <will.deacon@arm.com> wrote:
    >> On Sat, Jul 12, 2014 at 01:57:31PM +0100, Rob Clark wrote:
    >>> On Sat, Jul 12, 2014 at 8:22 AM, Arnd Bergmann <arnd@arndb.de> wrote:
    >>>> On Saturday 12 July 2014, Rob Clark wrote:
    >>>>>>> Was there actually a good reason for having the device link to the
    >>>>>>> iommu rather than the other way around? How much would people hate it
    >>>>>>> if I just ignore the generic bindings and use something that works for
    >>>>>>> me instead. I mean, it isn't exactly like there is going to be .dts
    >>>>>>> re-use across different SoC's.. and at least with current IOMMU API
    >>>>>>> some sort of of_get_named_iommu() API doesn't really make sense.
    >>>>>>
    >>>>>> The thing is, if you end up ignoring the generic binding then we have two
    >>>>>> IOMMUs using the same (ARM SMMU) binding and it begs the question as to
    >>>>>> which is the more generic! I know we're keen to get this merged, but merging
    >>>>>> something that people won't use and calling it generic doesn't seem ideal
    >>>>>> either. We do, however, desperately need a generic binding.
    >>>>>
    >>>>> yeah, ignoring the generic binding is not my first choice. I'd rather
    >>>>> have something that works well for everyone. But I wasn't really sure
    >>>>> if the current proposal was arbitrary, or if there are some
    >>>>> conflicting requirements between different platforms.
    >>>>
    >>>> The common case that needs to be simple is attaching one (master) device
    >>>> to an IOMMU using the shared global context for the purposes of implementing
    >>>> the dma-mapping API.
    >>>
    >>> well, I don't disagree that IOMMU API has some problems. It is too
    >>> tied to the bus type, which doesn't really seem to make sense for
    >>> platform devices. (Unless we start having multiple platform busses?)
    >>>
    >>> But at least given the current IOMMU API I'm not really sure how it
    >>> makes a difference which way the link goes. But if there has already
    >>> been some discussion about how you want to handle the tie in with
    >>> dma-mapping, if you could point me at that then maybe your point will
    >>> make more sense to me.
    >>
    >> If you look at the proposed binding in isolation, I think it *is* cleaner
    >> than the ARM SMMU binding (I've acked it...) and I believe it's more
    >> consistent with the way we describe linkages elsewhere.
    >>
    >> However, the issue you're raising is that it's more difficult to make use of
    >> in a Linux IOMMU driver. The reward you'll get for using it will come
    >> eventually when the DMA ops are automatically swizzled for devices using the
    >> generic binding.
    >>
    >> My plan for the ARM SMMU driver is:
    >>
    >> (1) Change ->probe() to walk the device-tree looking for all masters with
    >> phandles back to the SMMU instance being probed
    >>
    >> (2) For each master, extract the Stream IDs and add them to the internal
    >> SMMU driver data structures (an rbtree per SMMU instance). For
    >> hotpluggable buses, we'll need a way for the bus controller to
    >> reserve a range of IDs -- this will likely be a later extension to
    >> the binding.
    >>
    >> (3) When we get an ->add() call, warn if it's a device we haven't seen
    >> and reject the addition.
    >>
    >> That way, ->attach() should be the same as it is now, I think.
    >>
    >> Have you tried implementing something like that? We agreed that (1) isn't
    >> pretty, but I don't have a good alternative and it's only done at
    >> probe-time.
    >
    > I haven't tried implementing that yet, but I'm sure it would work. I
    > was just hoping to avoid having to do that ;-)

    Is the reason you want to do it this way because you want to guarantee
    that all masters (and stream IDs) have been identified before the first
    attach call? I am just wondering why you cannot continue doing the
    master/streamID discovery during add_device() callback?

    >>
    >> BTW: Is the msm-v0 IOMMU compatible with the ARM SMMU driver, or is it a
    >> completely different design requiring a different driver?
    >
    > My understanding is that it is different from msm v1 IOMMU, although I
    > think it shares the same pagetable format with v1. Not sure if that
    > is the same as arm-smmu? If so it might be nice to try to extract
    > out some shared helper fxns for map/unmap as well.
    >
    > I expect Olav knows better the similarities/differences.
    >

    The msm-v0 IOMMU is not compatible with ARM SMMUv1 specification.
    However, it is a close cousin. The hardware was designed before the ARM
    SMMUv1 specification was available I believe. But it shares many of the
    same concepts as the ARM SMMUv1.

    msm-v0 IOMMU supports V7S page table format only. The ARM SMMU driver
    does not support V7S at this time. However, I believe we need to support
    this.

    Will, this reminds me. We definitely have a need to use different page
    tables in the ARM SMMU driver vs. the ARM CPU. We have an SoC with ARMv8
    cores (and thus ARMv8 page tables) but the SMMUs (SMMUv1) on this SoC
    only have support for V7S/V7L page table format. So we cannot use the
    same page table format as the CPU.

    Thanks,

    Olav

    --
    The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
    hosted by The Linux Foundation


    \
     
     \ /
      Last update: 2014-07-16 04:01    [W:7.011 / U:0.040 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site