lkml.org 
[lkml]   [2014]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 2/2] phy: qcom: Add device tree bindings for IPQ806x SATA PHY
Date
Add binding spec for Qualcomm SoC PHYs, starting with the SATA PHY on
the IPQ806x family of SoCs.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
v6:
* Moved binding to qcom-ipq806x-sata-phy.txt instead of qcom-phy.txt

.../bindings/phy/qcom-ipq806x-sata-phy.txt | 23 ++++++++++++++++++++++
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt
new file mode 100644
index 0000000..76bfbd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt
@@ -0,0 +1,23 @@
+Qualcomm IPQ806x SATA PHY Controller
+------------------------------------
+
+SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
+Each SATA PHY controller should have its own node.
+
+Required properties:
+- compatible: compatible list, contains "qcom,ipq806x-sata-phy"
+- reg: offset and length of the SATA PHY register set;
+- #phy-cells: must be zero
+- clocks: must be exactly one entry
+- clock-names: must be "cfg"
+
+Example:
+ sata_phy: sata-phy@1b400000 {
+ compatible = "qcom,ipq806x-sata-phy";
+ reg = <0x1b400000 0x200>;
+
+ clocks = <&gcc SATA_PHY_CFG_CLK>;
+ clock-names = "cfg";
+
+ #phy-cells = <0>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation


\
 
 \ /
  Last update: 2014-07-15 19:01    [W:0.031 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site