lkml.org 
[lkml]   [2014]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 92/93] Staging: comedi: 8255: fixed by adding an empthy line
On 2014-07-15 04:15, sam-the-6 wrote:
> From: Sam Asadi <asadi.samuel@gmail.com>
>
> fixed a coding style issue.
>
> Signed-off-by: Sam Asadi <asadi.samuel@gmail.com>
> modified: drivers/staging/comedi/drivers/8255.c
> ---
> drivers/staging/comedi/drivers/8255.c | 150 ++++++++++++++++-----------------
> 1 file changed, 74 insertions(+), 76 deletions(-)
>
> diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
> index 46113a3..de273c7 100644
> --- a/drivers/staging/comedi/drivers/8255.c
> +++ b/drivers/staging/comedi/drivers/8255.c
> @@ -1,77 +1,73 @@
> /*
> - comedi/drivers/8255.c
> - Driver for 8255
> -
> - COMEDI - Linux Control and Measurement Device Interface
> - Copyright (C) 1998 David A. Schleef <ds@schleef.org>
> -
> - This program is free software; you can redistribute it and/or modify
> - it under the terms of the GNU General Public License as published by
> - the Free Software Foundation; either version 2 of the License, or
> - (at your option) any later version.
> -
> - This program is distributed in the hope that it will be useful,
> - but WITHOUT ANY WARRANTY; without even the implied warranty of
> - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - GNU General Public License for more details.
> + comedi/drivers/8255.c
> + Driver for 8255
> +
> + COMEDI - Linux Control and Measurement Device Interface
> + Copyright (C) 1998 David A. Schleef <ds@schleef.org>
> +
> + This program is free software; you can redistribute it and/or modify
> + it under the terms of the GNU General Public License as published by
> + the Free Software Foundation; either version 2 of the License, or
> + (at your option) any later version.
> +
> + This program is distributed in the hope that it will be useful,
> + but WITHOUT ANY WARRANTY; without even the implied warranty of
> + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + GNU General Public License for more details.
> +
> + Driver: 8255
> + Description: generic 8255 support
> + Devices: [standard] 8255 (8255)
> + Author: ds
> + Status: works
> + Updated: Fri, 7 Jun 2002 12:56:45 -0700
> +
> + The classic in digital I/O. The 8255 appears in Comedi as a single
> + digital I/O subdevice with 24 channels. The channel 0 corresponds
> + to the 8255's port A, bit 0; channel 23 corresponds to port C, bit
> + 7. Direction configuration is done in blocks, with channels 0-7,
> + 8-15, 16-19, and 20-23 making up the 4 blocks. The only 8255 mode
> + supported is mode 0.
> +
> + You should enable compilation this driver if you plan to use a board
> + that has an 8255 chip. For multifunction boards, the main driver will
> + configure the 8255 subdevice automatically.
> +
> + This driver also works independently with ISA and PCI cards that
> + directly map the 8255 registers to I/O ports, including cards with
> + multiple 8255 chips. To configure the driver for such a card, the
> + option list should be a list of the I/O port bases for each of the
> + 8255 chips. For example,
> +
> + comedi_config /dev/comedi0 8255 0x200,0x204,0x208,0x20c
> +
> + Note that most PCI 8255 boards do NOT work with this driver, and
> + need a separate driver as a wrapper. For those that do work, the
> + I/O port base address can be found in the output of 'lspci -v'.
> +
> + This file contains an exported subdevice for driving an 8255.
> +
> + To use this subdevice as part of another driver, you need to
> + set up the subdevice in the attach function of the driver by
> + calling:
> +
> + subdev_8255_init(device, subdevice, io_function, iobase)
> +
> + device and subdevice are pointers to the device and subdevice
> + structures. io_function will be called to provide the
> + low-level input/output to the device, i.e., actual register
> + access. io_function will be called with the value of iobase
> + as the last parameter. If the 8255 device is mapped as 4
> + consecutive I/O ports, you can use NULL for io_function
> + and the I/O port base for iobase, and an internal function will
> + handle the register access.
> +
> + In addition, if the main driver handles interrupts, you can
> + enable commands on the subdevice by calling subdev_8255_init_irq()
> + instead. Then, when you get an interrupt that is likely to be
> + from the 8255, you should call subdev_8255_interrupt(), which
> + will copy the latched value to a Comedi buffer.
> */
> -/*
> -Driver: 8255
> -Description: generic 8255 support
> -Devices: [standard] 8255 (8255)
> -Author: ds
> -Status: works
> -Updated: Fri, 7 Jun 2002 12:56:45 -0700
> -
> -The classic in digital I/O. The 8255 appears in Comedi as a single
> -digital I/O subdevice with 24 channels. The channel 0 corresponds
> -to the 8255's port A, bit 0; channel 23 corresponds to port C, bit
> -7. Direction configuration is done in blocks, with channels 0-7,
> -8-15, 16-19, and 20-23 making up the 4 blocks. The only 8255 mode
> -supported is mode 0.
> -
> -You should enable compilation this driver if you plan to use a board
> -that has an 8255 chip. For multifunction boards, the main driver will
> -configure the 8255 subdevice automatically.
> -
> -This driver also works independently with ISA and PCI cards that
> -directly map the 8255 registers to I/O ports, including cards with
> -multiple 8255 chips. To configure the driver for such a card, the
> -option list should be a list of the I/O port bases for each of the
> -8255 chips. For example,
> -
> - comedi_config /dev/comedi0 8255 0x200,0x204,0x208,0x20c
> -
> -Note that most PCI 8255 boards do NOT work with this driver, and
> -need a separate driver as a wrapper. For those that do work, the
> -I/O port base address can be found in the output of 'lspci -v'.
> -
> -*/
> -
> -/*
> - This file contains an exported subdevice for driving an 8255.
> -
> - To use this subdevice as part of another driver, you need to
> - set up the subdevice in the attach function of the driver by
> - calling:
> -
> - subdev_8255_init(device, subdevice, io_function, iobase)
> -
> - device and subdevice are pointers to the device and subdevice
> - structures. io_function will be called to provide the
> - low-level input/output to the device, i.e., actual register
> - access. io_function will be called with the value of iobase
> - as the last parameter. If the 8255 device is mapped as 4
> - consecutive I/O ports, you can use NULL for io_function
> - and the I/O port base for iobase, and an internal function will
> - handle the register access.
> -
> - In addition, if the main driver handles interrupts, you can
> - enable commands on the subdevice by calling subdev_8255_init_irq()
> - instead. Then, when you get an interrupt that is likely to be
> - from the 8255, you should call subdev_8255_interrupt(), which
> - will copy the latched value to a Comedi buffer.
> - */

Please format those as three separate comments in the usual block
comment style:

/*
* Multi
* line
* comment
*/

>
> #include <linux/module.h>
> #include "../comedidev.h"
> @@ -94,6 +90,7 @@ I/O port base address can be found in the output of 'lspci -v'.
>
> struct subdev_8255_private {
> unsigned long iobase;
> +
> int (*io)(int, int, int, unsigned long);
> };
>
> @@ -102,9 +99,8 @@ static int subdev_8255_io(int dir, int port, int data, unsigned long iobase)
> if (dir) {
> outb(data, iobase + port);
> return 0;
> - } else {
> + } else
> return inb(iobase + port);
> - }
> }

If either the 'if' or the 'else' use braces, the other one should too.

>
> void subdev_8255_interrupt(struct comedi_device *dev,
> @@ -309,9 +305,9 @@ EXPORT_SYMBOL_GPL(subdev_8255_init_irq);
>
> /*
>
> - Start of the 8255 standalone device
> + Start of the 8255 standalone device
>
> - */
> +*/

Please use the usual block comment style.

>
> static int dev_8255_attach(struct comedi_device *dev,
> struct comedi_devconfig *it)
> @@ -373,8 +369,10 @@ static struct comedi_driver dev_8255_driver = {
> .attach = dev_8255_attach,
> .detach = dev_8255_detach,
> };
> +
> module_comedi_driver(dev_8255_driver);
>
> MODULE_AUTHOR("Comedi http://www.comedi.org");
> MODULE_DESCRIPTION("Comedi low-level driver");
> MODULE_LICENSE("GPL");
> +
>

Extra blank line is unnecessary.

--
-=( Ian Abbott @ MEV Ltd. E-mail: <abbotti@mev.co.uk> )=-
-=( Tel: +44 (0)161 477 1898 FAX: +44 (0)161 718 3587 )=-


\
 
 \ /
  Last update: 2014-07-15 12:21    [W:0.197 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site