Messages in this thread | | | Date | Mon, 14 Jul 2014 14:26:18 +0530 | From | Kishon Vijay Abraham I <> | Subject | Re: [PATCH v2 1/2] phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs |
| |
Hi,
On Wednesday 09 July 2014 05:19 PM, Sachin Kamat wrote: > Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and > USB gadget controller supported by the DWC2 gadget driver, make it > depend on them and default to ARCH_EXYNOS as they are meant for > Exynos platforms. Also, make the sub-drivers silent options enabling > them based on the SoC platforms that they are meant to work with. This > will make life easier for end users who do not have any way knowing the > dependencies.
There is a new Exynos PHY in town, Exynos 3250. Can you rebase your patch on top of that?
Thanks Kishon > > Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> > --- > Changes since v1: > * Added dependency on DWC2 gadget driver as suggested by Tomasz Figa. > --- > drivers/phy/Kconfig | 35 +++++++++++------------------------ > 1 file changed, 11 insertions(+), 24 deletions(-) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index fcdfe7c0e4a7..128f8b92b55c 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -123,43 +123,30 @@ config PHY_SUN4I_USB > config PHY_SAMSUNG_USB2 > tristate "Samsung USB 2.0 PHY driver" > depends on HAS_IOMEM > + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 > select GENERIC_PHY > select MFD_SYSCON > + default ARCH_EXYNOS > help > Enable this to support the Samsung USB 2.0 PHY driver for Samsung > - SoCs. This driver provides the interface for USB 2.0 PHY. Support for > - particular SoCs has to be enabled in addition to this driver. Number > - and type of supported phys depends on the SoC. > + SoCs. This driver provides the interface for USB 2.0 PHY. Support > + for particular PHYs will be enabled based on the SoC type in addition > + to this driver. > > config PHY_EXYNOS4210_USB2 > - bool "Support for Exynos 4210" > + bool > depends on PHY_SAMSUNG_USB2 > - depends on CPU_EXYNOS4210 > - help > - Enable USB PHY support for Exynos 4210. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for this > - particular SoC is compiled in the driver. In case of Exynos 4210 four > - phys are available - device, host, HSIC0 and HSIC1. > + default CPU_EXYNOS4210 > > config PHY_EXYNOS4X12_USB2 > - bool "Support for Exynos 4x12" > + bool > depends on PHY_SAMSUNG_USB2 > - depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) > - help > - Enable USB PHY support for Exynos 4x12. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for this > - particular SoC is compiled in the driver. In case of Exynos 4x12 four > - phys are available - device, host, HSIC0 and HSIC1. > + default SOC_EXYNOS4212 || SOC_EXYNOS4412 > > config PHY_EXYNOS5250_USB2 > - bool "Support for Exynos 5250" > + bool > depends on PHY_SAMSUNG_USB2 > - depends on SOC_EXYNOS5250 > - help > - Enable USB PHY support for Exynos 5250. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for this > - particular SoC is compiled in the driver. In case of Exynos 5250 four > - phys are available - device, host, HSIC0 and HSIC. > + default SOC_EXYNOS5250 || SOC_EXYNOS5420 > > config PHY_EXYNOS5_USBDRD > tristate "Exynos5 SoC series USB DRD PHY driver" >
| |