lkml.org 
[lkml]   [2014]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] regulator: s2mpxxx: Move regulator min/step voltages in common place
On 08.07.2014 14:27, Amit Daniel Kachhap wrote:
> This is a cleanup patch and moves min/step voltages in a common samsung
> header file so that they can be used by other s2mpxxx PMIC drivers. Only
> few required macros are added currently and others can be added if needed.
>
> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
> ---
> drivers/regulator/s2mpa01.c | 32 ++++++++++++------------
> drivers/regulator/s2mps11.c | 50 ++++++++++++++++++-------------------
> include/linux/mfd/samsung/core.h | 21 ++++++++++++++++
> include/linux/mfd/samsung/s2mpa01.h | 12 ---------
> include/linux/mfd/samsung/s2mps11.h | 9 -------
> include/linux/mfd/samsung/s2mps14.h | 10 --------
> 6 files changed, 62 insertions(+), 72 deletions(-)
>

Hi,

Looks good.

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

> diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
> index ee83b48..962c5f1 100644
> --- a/drivers/regulator/s2mpa01.c
> +++ b/drivers/regulator/s2mpa01.c
> @@ -241,8 +241,8 @@ static struct regulator_ops s2mpa01_buck_ops = {
> .ops = &s2mpa01_ldo_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPA01_LDO_MIN, \
> - .uV_step = S2MPA01_LDO_STEP1, \
> + .min_uV = MIN_800_MV, \
> + .uV_step = STEP_50_MV, \
> .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
> .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
> .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
> @@ -255,8 +255,8 @@ static struct regulator_ops s2mpa01_buck_ops = {
> .ops = &s2mpa01_ldo_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPA01_LDO_MIN, \
> - .uV_step = S2MPA01_LDO_STEP2, \
> + .min_uV = MIN_800_MV, \
> + .uV_step = STEP_25_MV, \
> .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
> .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
> .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
> @@ -270,8 +270,8 @@ static struct regulator_ops s2mpa01_buck_ops = {
> .ops = &s2mpa01_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPA01_BUCK_MIN1, \
> - .uV_step = S2MPA01_BUCK_STEP1, \
> + .min_uV = MIN_600_MV, \
> + .uV_step = STEP_6_25_MV, \
> .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPA01_RAMP_DELAY, \
> .vsel_reg = S2MPA01_REG_B1CTRL2 + (num - 1) * 2, \
> @@ -286,8 +286,8 @@ static struct regulator_ops s2mpa01_buck_ops = {
> .ops = &s2mpa01_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPA01_BUCK_MIN2, \
> - .uV_step = S2MPA01_BUCK_STEP1, \
> + .min_uV = MIN_800_MV, \
> + .uV_step = STEP_6_25_MV, \
> .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPA01_RAMP_DELAY, \
> .vsel_reg = S2MPA01_REG_B5CTRL2, \
> @@ -302,8 +302,8 @@ static struct regulator_ops s2mpa01_buck_ops = {
> .ops = &s2mpa01_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPA01_BUCK_MIN1, \
> - .uV_step = S2MPA01_BUCK_STEP1, \
> + .min_uV = MIN_600_MV, \
> + .uV_step = STEP_6_25_MV, \
> .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPA01_RAMP_DELAY, \
> .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
> @@ -318,8 +318,8 @@ static struct regulator_ops s2mpa01_buck_ops = {
> .ops = &s2mpa01_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPA01_BUCK_MIN2, \
> - .uV_step = S2MPA01_BUCK_STEP2, \
> + .min_uV = MIN_800_MV, \
> + .uV_step = STEP_12_5_MV, \
> .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPA01_RAMP_DELAY, \
> .vsel_reg = S2MPA01_REG_B8CTRL2, \
> @@ -334,8 +334,8 @@ static struct regulator_ops s2mpa01_buck_ops = {
> .ops = &s2mpa01_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPA01_BUCK_MIN4, \
> - .uV_step = S2MPA01_BUCK_STEP2, \
> + .min_uV = MIN_1500_MV, \
> + .uV_step = STEP_12_5_MV, \
> .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPA01_RAMP_DELAY, \
> .vsel_reg = S2MPA01_REG_B9CTRL2, \
> @@ -350,8 +350,8 @@ static struct regulator_ops s2mpa01_buck_ops = {
> .ops = &s2mpa01_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPA01_BUCK_MIN3, \
> - .uV_step = S2MPA01_BUCK_STEP2, \
> + .min_uV = MIN_1000_MV, \
> + .uV_step = STEP_12_5_MV, \
> .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPA01_RAMP_DELAY, \
> .vsel_reg = S2MPA01_REG_B10CTRL2, \
> diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
> index 02e2fb2..2098c3e 100644
> --- a/drivers/regulator/s2mps11.c
> +++ b/drivers/regulator/s2mps11.c
> @@ -250,14 +250,14 @@ static struct regulator_ops s2mps11_buck_ops = {
> .set_ramp_delay = s2mps11_set_ramp_delay,
> };
>
> -#define regulator_desc_s2mps11_ldo1(num) { \
> +#define regulator_desc_s2mps11_ldo1(num) { \
> .name = "LDO"#num, \
> .id = S2MPS11_LDO##num, \
> .ops = &s2mps11_ldo_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS11_LDO_MIN, \
> - .uV_step = S2MPS11_LDO_STEP1, \
> + .min_uV = MIN_800_MV, \
> + .uV_step = STEP_50_MV, \
> .n_voltages = S2MPS11_LDO_N_VOLTAGES, \
> .vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
> .vsel_mask = S2MPS11_LDO_VSEL_MASK, \
> @@ -270,8 +270,8 @@ static struct regulator_ops s2mps11_buck_ops = {
> .ops = &s2mps11_ldo_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS11_LDO_MIN, \
> - .uV_step = S2MPS11_LDO_STEP2, \
> + .min_uV = MIN_800_MV, \
> + .uV_step = STEP_25_MV, \
> .n_voltages = S2MPS11_LDO_N_VOLTAGES, \
> .vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
> .vsel_mask = S2MPS11_LDO_VSEL_MASK, \
> @@ -285,8 +285,8 @@ static struct regulator_ops s2mps11_buck_ops = {
> .ops = &s2mps11_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS11_BUCK_MIN1, \
> - .uV_step = S2MPS11_BUCK_STEP1, \
> + .min_uV = MIN_600_MV, \
> + .uV_step = STEP_6_25_MV, \
> .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPS11_RAMP_DELAY, \
> .vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \
> @@ -301,8 +301,8 @@ static struct regulator_ops s2mps11_buck_ops = {
> .ops = &s2mps11_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS11_BUCK_MIN1, \
> - .uV_step = S2MPS11_BUCK_STEP1, \
> + .min_uV = MIN_600_MV, \
> + .uV_step = STEP_6_25_MV, \
> .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPS11_RAMP_DELAY, \
> .vsel_reg = S2MPS11_REG_B5CTRL2, \
> @@ -317,8 +317,8 @@ static struct regulator_ops s2mps11_buck_ops = {
> .ops = &s2mps11_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS11_BUCK_MIN1, \
> - .uV_step = S2MPS11_BUCK_STEP1, \
> + .min_uV = MIN_600_MV, \
> + .uV_step = STEP_6_25_MV, \
> .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPS11_RAMP_DELAY, \
> .vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \
> @@ -333,8 +333,8 @@ static struct regulator_ops s2mps11_buck_ops = {
> .ops = &s2mps11_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS11_BUCK_MIN3, \
> - .uV_step = S2MPS11_BUCK_STEP3, \
> + .min_uV = MIN_3000_MV, \
> + .uV_step = STEP_25_MV, \
> .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPS11_RAMP_DELAY, \
> .vsel_reg = S2MPS11_REG_B9CTRL2, \
> @@ -349,8 +349,8 @@ static struct regulator_ops s2mps11_buck_ops = {
> .ops = &s2mps11_buck_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS11_BUCK_MIN2, \
> - .uV_step = S2MPS11_BUCK_STEP2, \
> + .min_uV = MIN_750_MV, \
> + .uV_step = STEP_12_5_MV, \
> .n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
> .ramp_delay = S2MPS11_RAMP_DELAY, \
> .vsel_reg = S2MPS11_REG_B10CTRL2, \
> @@ -473,8 +473,8 @@ static struct regulator_ops s2mps14_reg_ops = {
> .ops = &s2mps14_reg_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS14_LDO_MIN_800MV, \
> - .uV_step = S2MPS14_LDO_STEP_25MV, \
> + .min_uV = MIN_800_MV, \
> + .uV_step = STEP_25_MV, \
> .n_voltages = S2MPS14_LDO_N_VOLTAGES, \
> .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
> .vsel_mask = S2MPS14_LDO_VSEL_MASK, \
> @@ -487,8 +487,8 @@ static struct regulator_ops s2mps14_reg_ops = {
> .ops = &s2mps14_reg_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS14_LDO_MIN_1800MV, \
> - .uV_step = S2MPS14_LDO_STEP_25MV, \
> + .min_uV = MIN_1800_MV, \
> + .uV_step = STEP_25_MV, \
> .n_voltages = S2MPS14_LDO_N_VOLTAGES, \
> .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
> .vsel_mask = S2MPS14_LDO_VSEL_MASK, \
> @@ -501,8 +501,8 @@ static struct regulator_ops s2mps14_reg_ops = {
> .ops = &s2mps14_reg_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS14_LDO_MIN_800MV, \
> - .uV_step = S2MPS14_LDO_STEP_12_5MV, \
> + .min_uV = MIN_800_MV, \
> + .uV_step = STEP_12_5_MV, \
> .n_voltages = S2MPS14_LDO_N_VOLTAGES, \
> .vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
> .vsel_mask = S2MPS14_LDO_VSEL_MASK, \
> @@ -515,8 +515,8 @@ static struct regulator_ops s2mps14_reg_ops = {
> .ops = &s2mps14_reg_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS14_BUCK1235_MIN_600MV, \
> - .uV_step = S2MPS14_BUCK1235_STEP_6_25MV, \
> + .min_uV = MIN_600_MV, \
> + .uV_step = STEP_6_25_MV, \
> .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
> .linear_min_sel = S2MPS14_BUCK1235_START_SEL, \
> .ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \
> @@ -531,8 +531,8 @@ static struct regulator_ops s2mps14_reg_ops = {
> .ops = &s2mps14_reg_ops, \
> .type = REGULATOR_VOLTAGE, \
> .owner = THIS_MODULE, \
> - .min_uV = S2MPS14_BUCK4_MIN_1400MV, \
> - .uV_step = S2MPS14_BUCK4_STEP_12_5MV, \
> + .min_uV = MIN_1400_MV, \
> + .uV_step = STEP_12_5_MV, \
> .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
> .linear_min_sel = S2MPS14_BUCK4_START_SEL, \
> .ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \
> diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
> index 47d8424..a4118aa 100644
> --- a/include/linux/mfd/samsung/core.h
> +++ b/include/linux/mfd/samsung/core.h
> @@ -14,6 +14,27 @@
> #ifndef __LINUX_MFD_SEC_CORE_H
> #define __LINUX_MFD_SEC_CORE_H
>
> +/* Macros to represent minimum voltages for LDO/BUCK */
> +#define MIN_3000_MV 3000000
> +#define MIN_2500_MV 2500000
> +#define MIN_2000_MV 2000000
> +#define MIN_1800_MV 1800000
> +#define MIN_1500_MV 1500000
> +#define MIN_1400_MV 1400000
> +#define MIN_1000_MV 1000000
> +
> +#define MIN_900_MV 900000
> +#define MIN_850_MV 850000
> +#define MIN_800_MV 800000
> +#define MIN_750_MV 750000
> +#define MIN_600_MV 600000
> +
> +/* Macros to represent steps for LDO/BUCK */
> +#define STEP_50_MV 50000
> +#define STEP_25_MV 25000
> +#define STEP_12_5_MV 12500
> +#define STEP_6_25_MV 6250
> +
> enum sec_device_type {
> S5M8751X,
> S5M8763X,
> diff --git a/include/linux/mfd/samsung/s2mpa01.h b/include/linux/mfd/samsung/s2mpa01.h
> index fbc63bc..2766108 100644
> --- a/include/linux/mfd/samsung/s2mpa01.h
> +++ b/include/linux/mfd/samsung/s2mpa01.h
> @@ -155,18 +155,6 @@ enum s2mpa01_regulators {
> S2MPA01_REGULATOR_MAX,
> };
>
> -#define S2MPA01_BUCK_MIN1 600000
> -#define S2MPA01_BUCK_MIN2 800000
> -#define S2MPA01_BUCK_MIN3 1000000
> -#define S2MPA01_BUCK_MIN4 1500000
> -#define S2MPA01_LDO_MIN 800000
> -
> -#define S2MPA01_BUCK_STEP1 6250
> -#define S2MPA01_BUCK_STEP2 12500
> -
> -#define S2MPA01_LDO_STEP1 50000
> -#define S2MPA01_LDO_STEP2 25000
> -
> #define S2MPA01_LDO_VSEL_MASK 0x3F
> #define S2MPA01_BUCK_VSEL_MASK 0xFF
> #define S2MPA01_ENABLE_MASK (0x03 << S2MPA01_ENABLE_SHIFT)
> diff --git a/include/linux/mfd/samsung/s2mps11.h b/include/linux/mfd/samsung/s2mps11.h
> index b3ddf98..7981a9d 100644
> --- a/include/linux/mfd/samsung/s2mps11.h
> +++ b/include/linux/mfd/samsung/s2mps11.h
> @@ -171,15 +171,6 @@ enum s2mps11_regulators {
> S2MPS11_REGULATOR_MAX,
> };
>
> -#define S2MPS11_BUCK_MIN1 600000
> -#define S2MPS11_BUCK_MIN2 750000
> -#define S2MPS11_BUCK_MIN3 3000000
> -#define S2MPS11_LDO_MIN 800000
> -#define S2MPS11_BUCK_STEP1 6250
> -#define S2MPS11_BUCK_STEP2 12500
> -#define S2MPS11_BUCK_STEP3 25000
> -#define S2MPS11_LDO_STEP1 50000
> -#define S2MPS11_LDO_STEP2 25000
> #define S2MPS11_LDO_VSEL_MASK 0x3F
> #define S2MPS11_BUCK_VSEL_MASK 0xFF
> #define S2MPS11_ENABLE_MASK (0x03 << S2MPS11_ENABLE_SHIFT)
> diff --git a/include/linux/mfd/samsung/s2mps14.h b/include/linux/mfd/samsung/s2mps14.h
> index 900cd7a..c92f478 100644
> --- a/include/linux/mfd/samsung/s2mps14.h
> +++ b/include/linux/mfd/samsung/s2mps14.h
> @@ -123,10 +123,6 @@ enum s2mps14_regulators {
> };
>
> /* Regulator constraints for BUCKx */
> -#define S2MPS14_BUCK1235_MIN_600MV 600000
> -#define S2MPS14_BUCK4_MIN_1400MV 1400000
> -#define S2MPS14_BUCK1235_STEP_6_25MV 6250
> -#define S2MPS14_BUCK4_STEP_12_5MV 12500
> #define S2MPS14_BUCK1235_START_SEL 0x20
> #define S2MPS14_BUCK4_START_SEL 0x40
> /*
> @@ -136,12 +132,6 @@ enum s2mps14_regulators {
> */
> #define S2MPS14_BUCK_RAMP_DELAY 12500
>
> -/* Regulator constraints for different types of LDOx */
> -#define S2MPS14_LDO_MIN_800MV 800000
> -#define S2MPS14_LDO_MIN_1800MV 1800000
> -#define S2MPS14_LDO_STEP_12_5MV 12500
> -#define S2MPS14_LDO_STEP_25MV 25000
> -
> #define S2MPS14_LDO_VSEL_MASK 0x3F
> #define S2MPS14_BUCK_VSEL_MASK 0xFF
> #define S2MPS14_ENABLE_MASK (0x03 << S2MPS14_ENABLE_SHIFT)
>



\
 
 \ /
  Last update: 2014-07-14 11:41    [W:0.227 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site