lkml.org 
[lkml]   [2014]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 01/13] clk: tegra: Add binding for the Tegra124 DFLL clocksource
On Fri, Jul 11, 2014 at 08:21:27PM +0300, Tuomas Tynkkynen wrote:
>
>
> On 11/07/14 20:08, Andrew Bresticker wrote:
> >On Fri, Jul 11, 2014 at 9:48 AM, Tuomas Tynkkynen <ttynkkynen@nvidia.com> wrote:
> >>
> >>
> >>On 11/07/14 19:28, Andrew Bresticker wrote:
> >>>
> >>>On Thu, Jul 10, 2014 at 2:42 PM, Tuomas Tynkkynen <ttynkkynen@nvidia.com>
> >>>wrote:
> >>>>
> >>>>The DFLL is the main clocksource for the fast CPU cluster on Tegra124
> >>>>and also provides automatic CPU rail voltage scaling as well. The DFLL
> >>>>is a separate IP block from the usual Tegra124 clock-and-reset
> >>>>controller, so it gets its own node in the device tree.
> >>>
> >>>
> >>>>diff --git
> >>>>a/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
> >>>>b/Documentation/devicetree/bindings/clock/nvidia,tegra124-dfll.txt
> >>>
> >>>
> >>>>+- nvidia,pmic-voltage-table: Array of 2-tuples. Each entry should have
> >>>>the
> >>>>+ form <register-value voltage-in-uV>, indicating the register value
> >>>>that
> >>>>+ needs to be programmed to the PMIC for changing the VDD_CPU voltage to
> >>>>+ the specified voltage. The table must be in ascending order by the
> >>>>voltage.
> >>>
> >>>
> >>>Instead of listing the register values for each voltage in the DT,
> >>>can't you use regulator_list_voltage() to create this map?
> >>>
> >>
> >>I don't see a way to get the register values that way, unless we assume that
> >>the mapping is linear and doesn't have holes.
> >
> >Hmm... I guess if you don't assume it's linear and continuous you'd
> >have to iterate over all 256 selectors.
> >
>
> I don't think we can assume that each selector maps to a concrete register
> value, though I'm not sure. include/linux/regulator/driver.h documents for
> @list_voltage "Selectors range from zero to one less
> regulator_desc.n_voltages." but maybe the consumer API could take different
> values.

I don't think the regulator API makes any guarantees that the selector
corresponds to a register value. Adding Mark Brown, maybe he can help
figure out the best way to do this.

Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-07-14 11:41    [W:0.192 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site