lkml.org 
[lkml]   [2014]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [RESEND][PATCH 06/10][SCSI]mpt2sas: For >2TB volumes, DirectDrive support sends IO's with LBA bit 31 to IR FW instead of DirectDrive
From
Date
>>>>> "Sreekanth" == Reddy, Sreekanth <Sreekanth.Reddy@avagotech.com> writes:

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6ae109b..4a0728a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -3865,7 +3865,8 @@ _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
struct _raid_device *raid_device, Mpi2SCSIIORequest_t *mpi_request,
u16 smid)
{
- u32 v_lba, p_lba, stripe_off, stripe_unit, column, io_size;
+ u32 p_lba, stripe_off, stripe_unit, column, io_size;
+ u64 v_lba;
u32 stripe_sz, stripe_exp;
u8 num_pds, *cdb_ptr, i;
u8 cdb0 = scmd->cmnd[0];
@@ -3882,12 +3883,17 @@ _scsih_setup_direct_io(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
| cdb_ptr[5])) {
io_size = scsi_bufflen(scmd) >>
raid_device->block_exponent;
- i = (cdb0 < READ_16) ? 2 : 6;
+
/* get virtual lba */
- v_lba = be32_to_cpu(*(__be32 *)(&cdb_ptr[i]));
+ if (cdb0 < READ_16)
+ v_lba = be32_to_cpu(*(__be32 *)(&cdb_ptr[2]));
+ else
+ v_lba = be64_to_cpu(*(__be64 *)(&cdb_ptr[2]));

Why aren't you using scsi_get_lba() instead of all this nasty CDB
parsing?

+
+ i = (cdb0 < READ_16) ? 2 : 6;

What about WRITE_16? WRITE_16 > READ_16.

if (((u64)v_lba + (u64)io_size - 1) <=
- (u32)raid_device->max_lba) {
+ raid_device->max_lba) {
stripe_sz = raid_device->stripe_sz;
stripe_exp = raid_device->stripe_exponent;
stripe_off = v_lba & (stripe_sz - 1);
Also, this is not touched by the patch, but you're then doing:

(*(__be32 *)(&cdb_ptr[i])) = cpu_to_be32(p_lba);

What if this is a 6-byte READ/WRITE command? You'll end up exceeding the
size of the LBA field.

What if you're using a 16-byte CDB and the target device LBA is > 2TB?
--
Martin K. Petersen Oracle Linux Engineering


\
 
 \ /
  Last update: 2014-07-13 18:01    [W:0.153 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site