lkml.org 
[lkml]   [2014]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] media: em28xx-dvb update fe exit flag to indicate device disconnect
Date
Change em28xx_dvb_fini() to set fe exit flag to DVB_FE_DEVICE_REMOVED
when device is disconnected. em28xx maintains device disconnect status
in em28xx device. fe drivers will be able to now check the fe exit
status to avoid accessing the device, from their release interfaces
when called from disconnect path. This change depends on dvb-core
change that exports fe exit flag by moving it from fepriv to fe.

Signed-off-by: Shuah Khan <shuah.kh@samsung.com>
---
drivers/media/usb/em28xx/em28xx-dvb.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/em28xx/em28xx-dvb.c b/drivers/media/usb/em28xx/em28xx-dvb.c
index 8d5cb62..5663d62 100644
--- a/drivers/media/usb/em28xx/em28xx-dvb.c
+++ b/drivers/media/usb/em28xx/em28xx-dvb.c
@@ -1668,10 +1668,14 @@ static int em28xx_dvb_fini(struct em28xx *dev)
if (dev->disconnected) {
/* We cannot tell the device to sleep
* once it has been unplugged. */
- if (dvb->fe[0])
+ if (dvb->fe[0]) {
prevent_sleep(&dvb->fe[0]->ops);
- if (dvb->fe[1])
+ dvb->fe[0]->exit = DVB_FE_DEVICE_REMOVED;
+ }
+ if (dvb->fe[1]) {
prevent_sleep(&dvb->fe[1]->ops);
+ dvb->fe[1]->exit = DVB_FE_DEVICE_REMOVED;
+ }
}

em28xx_unregister_dvb(dvb);
--
1.7.10.4


\
 
 \ /
  Last update: 2014-07-12 19:41    [W:0.065 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site