lkml.org 
[lkml]   [2014]   [Jul]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 1/2] phy: Kconfig: Re-organize Exynos USB 2.0 PHY configs
Date
On Wednesday, July 09, 2014 8:49 PM, Sachin Kamat wrote:
>
> Since the USB 2.0 PHYs are required with EHCI/OHCI USB drivers and
> USB gadget controller supported by the DWC2 gadget driver, make it
> depend on them and default to ARCH_EXYNOS as they are meant for
> Exynos platforms. Also, make the sub-drivers silent options enabling
> them based on the SoC platforms that they are meant to work with. This
> will make life easier for end users who do not have any way knowing the
> dependencies.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com>

Reviewed-by: Jingoo Han <jg1.han@samsung.com>

Best regards,
Jingoo Han

> ---
> Changes since v1:
> * Added dependency on DWC2 gadget driver as suggested by Tomasz Figa.
> ---
> drivers/phy/Kconfig | 35 +++++++++++------------------------
> 1 file changed, 11 insertions(+), 24 deletions(-)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index fcdfe7c0e4a7..128f8b92b55c 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -123,43 +123,30 @@ config PHY_SUN4I_USB
> config PHY_SAMSUNG_USB2
> tristate "Samsung USB 2.0 PHY driver"
> depends on HAS_IOMEM
> + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
> select GENERIC_PHY
> select MFD_SYSCON
> + default ARCH_EXYNOS
> help
> Enable this to support the Samsung USB 2.0 PHY driver for Samsung
> - SoCs. This driver provides the interface for USB 2.0 PHY. Support for
> - particular SoCs has to be enabled in addition to this driver. Number
> - and type of supported phys depends on the SoC.
> + SoCs. This driver provides the interface for USB 2.0 PHY. Support
> + for particular PHYs will be enabled based on the SoC type in addition
> + to this driver.
>
> config PHY_EXYNOS4210_USB2
> - bool "Support for Exynos 4210"
> + bool
> depends on PHY_SAMSUNG_USB2
> - depends on CPU_EXYNOS4210
> - help
> - Enable USB PHY support for Exynos 4210. This option requires that
> - Samsung USB 2.0 PHY driver is enabled and means that support for this
> - particular SoC is compiled in the driver. In case of Exynos 4210 four
> - phys are available - device, host, HSIC0 and HSIC1.
> + default CPU_EXYNOS4210
>
> config PHY_EXYNOS4X12_USB2
> - bool "Support for Exynos 4x12"
> + bool
> depends on PHY_SAMSUNG_USB2
> - depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
> - help
> - Enable USB PHY support for Exynos 4x12. This option requires that
> - Samsung USB 2.0 PHY driver is enabled and means that support for this
> - particular SoC is compiled in the driver. In case of Exynos 4x12 four
> - phys are available - device, host, HSIC0 and HSIC1.
> + default SOC_EXYNOS4212 || SOC_EXYNOS4412
>
> config PHY_EXYNOS5250_USB2
> - bool "Support for Exynos 5250"
> + bool
> depends on PHY_SAMSUNG_USB2
> - depends on SOC_EXYNOS5250
> - help
> - Enable USB PHY support for Exynos 5250. This option requires that
> - Samsung USB 2.0 PHY driver is enabled and means that support for this
> - particular SoC is compiled in the driver. In case of Exynos 5250 four
> - phys are available - device, host, HSIC0 and HSIC.
> + default SOC_EXYNOS5250 || SOC_EXYNOS5420
>
> config PHY_EXYNOS5_USBDRD
> tristate "Exynos5 SoC series USB DRD PHY driver"
> --
> 1.7.9.5



\
 
 \ /
  Last update: 2014-07-10 09:41    [W:0.075 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site