lkml.org 
[lkml]   [2014]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 12/14] cpufreq: cpu0: Extend support beyond CPU0
Date
Most of the infrastructure is in place now, with only little left. How to find
siblings ?

Stephen Boyd suggested to compare "clocks" properties from CPU's DT node and
siblings should match. This patch adds another routine find_siblings() which
calls of_clk_shared_by_cpus() to find if CPUs share clock line or not.

If of_clk_shared_by_cpus() returns error, we fallback to all CPUs sharing clock
line assumption as existing platforms don't have "clocks" property in all CPU
nodes and would fail from of_clk_shared_by_cpus().

Cc: devicetree@vger.kernel.org
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
.../devicetree/bindings/cpufreq/cpufreq-cpu0.txt | 72 ++++++++++++++++++++--
drivers/cpufreq/cpufreq-cpu0.c | 35 ++++++++++-
2 files changed, 101 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
index f055515..4b83c1a 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
@@ -1,11 +1,11 @@
-Generic CPU0 cpufreq driver
+Generic cpufreq driver

-It is a generic cpufreq driver for CPU0 frequency management. It
+It is a generic cpufreq driver for frequency management. It
supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
-systems which share clock and voltage across all CPUs.
+systems which may or maynot share clock and voltage across all CPUs.

Both required and optional properties listed below must be defined
-under node /cpus/cpu@0.
+under node /cpus/cpu@x. Where x is the first cpu inside a cluster.

Required properties:
- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
@@ -19,9 +19,16 @@ Optional properties:
- cooling-min-level:
- cooling-max-level:
Please refer to Documentation/devicetree/bindings/thermal/thermal.txt.
+- clocks: If CPU clock is populated from DT, "clocks" property must be copied to
+ every cpu node sharing clock with cpu@x. Generic cpufreq driver compares
+ "clocks" to find siblings, i.e. to see which CPUs share clock/voltages. If
+ only cpu@0 contains "clocks" property it is assumed that all CPUs share clock
+ line.

Examples:

+1. All CPUs share clock/voltages
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -36,6 +43,8 @@ cpus {
396000 950000
198000 850000
>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
cooling-min-level = <0>;
@@ -46,17 +55,72 @@ cpus {
compatible = "arm,cortex-a9";
reg = <1>;
next-level-cache = <&L2>;
+ clocks = <&clock CLK_ARM_CLK>;
};

cpu@2 {
compatible = "arm,cortex-a9";
reg = <2>;
next-level-cache = <&L2>;
+ clocks = <&clock CLK_ARM_CLK>;
};

cpu@3 {
compatible = "arm,cortex-a9";
reg = <3>;
next-level-cache = <&L2>;
+ clocks = <&clock CLK_ARM_CLK>;
+ };
+};
+
+
+2. All CPUs inside a cluster share clock/voltages, there are multiple clusters.
+
+cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 792000 1100000
+ 396000 950000
+ 198000 850000
+ >;
+ clocks = <&clock CLK_ARM1_CLK>;
+ clock-names = "cpu";
+ clock-latency = <61036>; /* two CLK32 periods */
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ clocks = <&clock CLK_ARM1_CLK>;
+ };
+
+ cpu@100 {
+ compatible = "arm,cortex-a7";
+ reg = <100>;
+ next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 792000 950000
+ 396000 750000
+ 198000 450000
+ >;
+ clocks = <&clock CLK_ARM2_CLK>;
+ clock-names = "cpu";
+ clock-latency = <61036>; /* two CLK32 periods */
+ };
+
+ cpu@101 {
+ compatible = "arm,cortex-a7";
+ reg = <101>;
+ next-level-cache = <&L2>;
+ clocks = <&clock CLK_ARM2_CLK>;
};
};
diff --git a/drivers/cpufreq/cpufreq-cpu0.c b/drivers/cpufreq/cpufreq-cpu0.c
index 44633f6..b3f2bf0 100644
--- a/drivers/cpufreq/cpufreq-cpu0.c
+++ b/drivers/cpufreq/cpufreq-cpu0.c
@@ -177,6 +177,30 @@ try_again:
return ret;
}

+/*
+ * Sets all CPUs as sibling if any cpu doesn't have a "clocks" property,
+ * Otherwise it matches "clocks" property to find siblings.
+ */
+static void find_siblings(struct cpufreq_policy *policy)
+{
+ int cpu, ret;
+
+ for_each_possible_cpu(cpu) {
+ if (cpu == policy->cpu)
+ continue;
+
+ ret = of_clk_shared_by_cpus(policy->cpu, cpu);
+
+ /* Error while parsing nodes, fallback to set-all */
+ if (ret < 0) {
+ cpumask_setall(policy->cpus);
+ return;
+ } else if (ret == 1) {
+ cpumask_set_cpu(cpu, policy->cpus);
+ }
+ }
+}
+
static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
{
struct cpufreq_frequency_table *freq_table;
@@ -266,9 +290,16 @@ static int cpu0_cpufreq_init(struct cpufreq_policy *policy)
policy->driver_data = priv;

policy->clk = cpu_clk;
- ret = cpufreq_generic_init(policy, freq_table, transition_latency);
- if (ret)
+
+ find_siblings(policy);
+ ret = cpufreq_table_validate_and_show(policy, freq_table);
+ if (ret) {
+ dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+ ret);
goto out_cooling_unregister;
+ }
+
+ policy->cpuinfo.transition_latency = transition_latency;

return 0;

--
2.0.0.rc2


\
 
 \ /
  Last update: 2014-07-01 20:41    [W:0.384 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site