lkml.org 
[lkml]   [2014]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] serial: 8250_dw: support high baudrates if possible
Date
Currently the Synopsys DesignWare 8250 driver assumes its UART clock
runs at a fixed rate. If a "real" clock was set up using the common
clock framework, and that clock's rate is adjustable, it may be
possible to support a wider range of baud rates by changing the
UART clock rate.

This is done by setting up a uart_port->set_termios method that
requests a clock rate change if a different rate might make it
more likely to achieve a specified baud. A new function
dw8250_adjustable_clk() determines whether such clock rate
adjustment is an option.

Signed-off-by: Alex Elder <elder@linaro.org>
---
v2: Limit clock changing to specific compatible devices.

drivers/tty/serial/8250/8250_dw.c | 57 +++++++++++++++++++++++++++++++++++++++
1 file changed, 57 insertions(+)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 51b307a..77cae28 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -242,6 +242,43 @@ dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
pm_runtime_put_sync_suspend(port->dev);
}

+/*
+ * If our clock was configured through the common clock framework we
+ * might be able to support a wider range of baud rates by changing
+ * its frequency. For the "traditional" baud rates (115200 or
+ * less), request the conventional 1.8432 MHz clock. The clock
+ * frequency needs to be at least 16 times the baud rate, so
+ * use 16 times the requested rate for those higher than 115200.
+ */
+static void
+dw8250_set_termios(struct uart_port *p, struct ktermios *new,
+ struct ktermios *old)
+{
+ struct dw8250_data *data = p->private_data;
+
+ if (!IS_ERR(data->clk)) {
+ speed_t baud;
+ unsigned int rate;
+
+ baud = tty_termios_baud_rate(new);
+ BUG_ON(baud > (speed_t)UINT_MAX);
+ rate = 16 * max(115200U, (unsigned int)baud);
+
+ /*
+ * Request a different clock rate if necessary, and
+ * record it if successful.
+ */
+ if (rate != p->uartclk) {
+ BUG_ON(!data->clk);
+ if (!clk_set_rate(data->clk, (unsigned long)rate))
+ p->uartclk = rate;
+ }
+ }
+
+ /* The standard code does most of the work. */
+ serial8250_do_set_termios(p, new, old);
+}
+
static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
{
struct dw8250_data *data = param;
@@ -282,6 +319,21 @@ static void dw8250_setup_port(struct uart_8250_port *up)
up->capabilities |= UART_CAP_AFE;
}

+/*
+ * Returns true if the UART clock's rate can be adjusted in order to
+ * achieve higher baud rates.
+ */
+static bool dw8250_adjustable_clk(struct uart_port *p)
+{
+ struct device_node *np = p->dev->of_node;
+
+ if (of_device_is_compatible(np, "brcm,bcm11351-dw-apb-uart"))
+ return true;
+ if (of_device_is_compatible(np, "brcm,bcm21664-dw-apb-uart"))
+ return true;
+ return false;
+}
+
static int dw8250_probe_of(struct uart_port *p,
struct dw8250_data *data)
{
@@ -289,6 +341,9 @@ static int dw8250_probe_of(struct uart_port *p,
u32 val;
bool has_ucv = true;

+ if (dw8250_adjustable_clk(p))
+ p->set_termios = dw8250_set_termios;
+
if (of_device_is_compatible(np, "cavium,octeon-3860-uart")) {
#ifdef __BIG_ENDIAN
/*
@@ -510,6 +565,8 @@ static const struct dev_pm_ops dw8250_pm_ops = {
static const struct of_device_id dw8250_of_match[] = {
{ .compatible = "snps,dw-apb-uart" },
{ .compatible = "cavium,octeon-3860-uart" },
+ { .compatible = "brcm,bcm11351-dw-apb-uart" },
+ { .compatible = "brcm,bcm21664-dw-apb-uart" },
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dw8250_of_match);
--
1.9.1


\
 
 \ /
  Last update: 2014-07-01 18:01    [W:0.067 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site