lkml.org 
[lkml]   [2014]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 08/14] AT91: PIT: Use pr_fmt
Date
All the panic messages hardcode the same prefix. Define the pr_fmt macro to
unify its definition.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
arch/arm/mach-at91/at91sam926x_time.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 641e860e83e7..0abdcb36c555 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/

+#define pr_fmt(fmt) "AT91: PIT: " fmt
+
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
@@ -208,7 +210,7 @@ static void __init at91sam926x_pit_common_init(void)
/* Set up irq handler */
ret = setup_irq(at91sam926x_pit_irq.irq, &at91sam926x_pit_irq);
if (ret)
- panic("AT91: PIT: Unable to setup IRQ\n");
+ panic(pr_fmt("Unable to setup IRQ\n"));

/* Set up and register clockevents */
pit_clkevt.mult = div_sc(pit_rate, NSEC_PER_SEC, pit_clkevt.shift);
@@ -222,7 +224,7 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node)

pit_base_addr = of_iomap(node, 0);
if (!pit_base_addr)
- panic("AT91: PIT: Could not map PIT address\n");
+ panic(pr_fmt("Could not map PIT address\n"));

mck = of_clk_get(node, 0);
if (IS_ERR(mck))
@@ -230,12 +232,12 @@ static void __init at91sam926x_pit_dt_init(struct device_node *node)
mck = clk_get(NULL, "mck");

if (IS_ERR(mck))
- panic("AT91: PIT: Unable to get mck clk\n");
+ panic(pr_fmt("Unable to get mck clk\n"));

/* Get the interrupts property */
irq = irq_of_parse_and_map(node, 0);
if (!irq)
- panic("AT91: PIT: Unable to get IRQ from DT\n");
+ panic(pr_fmt("Unable to get IRQ from DT\n"));

at91sam926x_pit_irq.irq = irq;

@@ -248,7 +250,7 @@ void __init at91sam926x_pit_init(void)
{
mck = clk_get(NULL, "mck");
if (IS_ERR(mck))
- panic("AT91: PIT: Unable to get mck clk\n");
+ panic(pr_fmt("Unable to get mck clk\n"));

at91sam926x_pit_irq.irq = NR_IRQS_LEGACY + AT91_ID_SYS;

@@ -263,5 +265,5 @@ void __init at91sam926x_ioremap_pit(u32 addr)
pit_base_addr = ioremap(addr, 16);

if (!pit_base_addr)
- panic("Impossible to ioremap PIT\n");
+ panic(pr_fmt("Impossible to ioremap PIT\n"));
}
--
2.0.0


\
 
 \ /
  Last update: 2014-07-01 12:21    [W:0.184 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site