lkml.org 
[lkml]   [2014]   [Jun]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 3.2 84/92] dma: mv_xor: Flush descriptors before activating a channel
3.2.60-rc1 review patch.  If anyone has any objections, please let me know.

------------------

From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>

commit 5a9a55bf9157d3490b0c8c4c81d4708602c26e07 upstream.

We need to use writel() instead of writel_relaxed() when starting
a channel, to ensure all the descriptors have been flushed before
the activation.

While at it, remove the unneeded read-modify-write and make the
code simpler.

Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
[bwh: Backported to 3.2: it was using __raw_readl() and __raw_writel()
which are just as wrong]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/dma/mv_xor.c | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -218,12 +218,10 @@ static void mv_set_mode(struct mv_xor_ch

static void mv_chan_activate(struct mv_xor_chan *chan)
{
- u32 activation;
-
dev_dbg(chan->device->common.dev, " activate chan.\n");
- activation = __raw_readl(XOR_ACTIVATION(chan));
- activation |= 0x1;
- __raw_writel(activation, XOR_ACTIVATION(chan));
+
+ /* writel ensures all descriptors are flushed before activation */
+ writel(BIT(0), XOR_ACTIVATION(chan));
}

static char mv_chan_is_busy(struct mv_xor_chan *chan)


\
 
 \ /
  Last update: 2014-06-07 06:01    [W:0.347 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site