lkml.org 
[lkml]   [2014]   [Jun]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/3] mtd: hisilicon: add device tree binding documentation
Date
Signed-off-by: Zhou Wang <wangzhou.bry@gmail.com>
---
.../devicetree/bindings/mtd/hisi-nand.txt | 38 ++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/hisi-nand.txt

diff --git a/Documentation/devicetree/bindings/mtd/hisi-nand.txt b/Documentation/devicetree/bindings/mtd/hisi-nand.txt
new file mode 100644
index 0000000..1cc6470
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/hisi-nand.txt
@@ -0,0 +1,38 @@
+Hisilicon Hip04 Soc NAND controller DT binding
+
+Required properties:
+- compatible: Should be "hisilicon,nfc504".
+- reg: Contain registers location and length for reg and data.
+- interrupts: Interrupt number for nfc.
+- nand-bus-width: See nand.txt.
+- nand-ecc-mode: See nand.txt.
+- hisi,nand-ecc-bits: ECC bits type support.
+ <0>: none ecc
+ <1>: Can correct 1bit per 512byte.
+ <6>: Can correct 16bits per 1K byte.
+- #address-cells: partition address.
+- #size-cells: partition size.
+
+Flash chip may optionally contain additional sub-nodes describing partitions of
+the address space. See partition.txt for more detail.
+
+Example:
+
+ nand: nand@4020000 {
+ compatible = "hisilicon,nfc504";
+ reg = <0x4020000 0x10000>, <0x5000000 0x1000>;
+ interrupts = <0 379 4>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ hisi,nand-ecc-bits = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "nand_text";
+ reg = <0x00000000 0x00400000>;
+ };
+
+ ...
+
+ };
--
1.7.9.5


\
 
 \ /
  Last update: 2014-06-30 10:21    [W:0.097 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site