lkml.org 
[lkml]   [2014]   [Jun]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 1/2] arm: dts: am4372: let boards access all nodes through phandles
Date
Tested-by: Franklin Cooper Jr. <fcooper@ti.com>

> -----Original Message-----
> From: Balbi, Felipe
> Sent: Monday, June 23, 2014 1:21 PM
> To: Benoit Cousson
> Cc: robh+dt@kernel.org; galak@codeaurora.org; Tony Lindgren;
> linux@arm.linux.org.uk; Nayak, Rajendra; Menon, Nishanth; R, Sricharan;
> devicetree@vger.kernel.org; Linux Kernel Mailing List; Linux OMAP Mailing
> List; Linux ARM Kernel Mailing List; Balbi, Felipe
> Subject: [PATCH v3 1/2] arm: dts: am4372: let boards access all nodes through
> phandles
>
> by providing phandles to rtc, wdt, cpu and dispc nodes, boards can access
> them to add board-specific data.
>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> ---
>
> Changes since v1:
> - added phandles to cpu and dispc
>
> arch/arm/boot/dts/am4372.dtsi | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
> index 49fa596..8d3c163 100644
> --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -30,7 +30,7 @@
> cpus {
> #address-cells = <1>;
> #size-cells = <0>;
> - cpu@0 {
> + cpu: cpu@0 {
> compatible = "arm,cortex-a9";
> device_type = "cpu";
> reg = <0>;
> @@ -270,7 +270,7 @@
> ti,hwmods = "counter_32k";
> };
>
> - rtc@44e3e000 {
> + rtc: rtc@44e3e000 {
> compatible = "ti,am4372-rtc","ti,da830-rtc";
> reg = <0x44e3e000 0x1000>;
> interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH @@ -
> 279,7 +279,7 @@
> status = "disabled";
> };
>
> - wdt@44e35000 {
> + wdt: wdt@44e35000 {
> compatible = "ti,am4372-wdt","ti,omap3-wdt";
> reg = <0x44e35000 0x1000>;
> interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; @@
> -871,7 +871,7 @@
> #size-cells = <1>;
> ranges;
>
> - dispc@4832a400 {
> + dispc: dispc@4832a400 {
> compatible = "ti,omap3-dispc";
> reg = <0x4832a400 0x400>;
> interrupts = <GIC_SPI 127
> IRQ_TYPE_LEVEL_HIGH>;
> --
> 2.0.0.390.gcb682f8



\
 
 \ /
  Last update: 2014-06-24 22:21    [W:0.203 / U:0.908 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site