lkml.org 
[lkml]   [2014]   [Jun]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v6 6/7] arm64: KVM: Set physical address size related factors in runtime
Date
On Tuesday, May 27, 2014 10:54 PM, Christoffer Dall wrote:
> On Mon, May 12, 2014 at 06:40:54PM +0900, Jungseok Lee wrote:
> > This patch sets TCR_EL2.PS, VTCR_EL2.T0SZ and vttbr_baddr_mask in runtime,
> > not compile time.
> >
> > In ARMv8, EL2 physical address size (TCR_EL2.PS) and stage2 input address
> > size (VTCR_EL2.T0SZE) cannot be determined in compile time since they
> > depends on hardware capability.
>
> s/depends/depend/

Okay, I will fix it.

> >
> > According to Table D4-23 and Table D4-25 in ARM DDI 0487A.b document,
> > vttbr_x is calculated using different hard-coded values with consideration
>
> super nit: I guess this is fixed values, and not hard-coded values

Yes, they're fixed values. I will revise it.

> > of T0SZ, granule size and the level of translation tables. Therefore,
> > vttbr_baddr_mask should be determined dynamically.
>
> so I think there's a deeper issue here, which is that we're not
> currently considering that for a given supported physical address size
> (run-time) and given page granularity (compile-time), we may have some
> flexibility in choosing the VTCR_EL2.SL0 field, and thereby the size of
> the initial stage2 pgd, by concatinating the initial level page tables.

As you mentioned in the other mail, kvm_mmu.c has an assumption on the level
of stage-2 page tables. I think it is a big work to choose SL0 in a flexible way.

> Additionally, the combinations of the givens may also force us to choose
> a specific SL0 value.
>
> Policy-wise, I would say we should concatenate as many initial level page
> tables as possible when using 4K pages, iow. always set VTCR_EL2.SL0 to
> the lowest possible value given the PARange and page size config we have
> at hand. That should always provide increased performance for VMs at
> the cost of maximum 16 concatenated tables, which is a 64K contiguous
> allocation and alignment, for 4K pages.
>
> For 64K pages, it becomes a 256K alignment and contiguous allocation
> requirement. One could argue that if this is not possible on your
> system, then you have no business runninng VMs on there, but I want to
> leave this open for comments...

I will add comments to the other mail.

> >
> > Cc: Marc Zyngier <marc.zyngier@arm.com>
> > Cc: Christoffer Dall <christoffer.dall@linaro.org>
> > Signed-off-by: Jungseok Lee <jays.lee@samsung.com>
> > Reviewed-by: Sungjinn Chung <sungjinn.chung@samsung.com>
> > ---
> > arch/arm/kvm/arm.c | 82 +++++++++++++++++++++++++++++++++++++-
> > arch/arm64/include/asm/kvm_arm.h | 17 ++------
> > arch/arm64/kvm/hyp-init.S | 20 +++++++---
> > 3 files changed, 98 insertions(+), 21 deletions(-)
> >
> > diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
> > index f0e50a0..9f19f2c 100644
> > --- a/arch/arm/kvm/arm.c
> > +++ b/arch/arm/kvm/arm.c
> > @@ -37,6 +37,7 @@
> > #include <asm/mman.h>
> > #include <asm/tlbflush.h>
> > #include <asm/cacheflush.h>
> > +#include <asm/cputype.h>
> > #include <asm/virt.h>
> > #include <asm/kvm_arm.h>
> > #include <asm/kvm_asm.h>
> > @@ -61,6 +62,9 @@ static atomic64_t kvm_vmid_gen = ATOMIC64_INIT(1);
> > static u8 kvm_next_vmid;
> > static DEFINE_SPINLOCK(kvm_vmid_lock);
> >
> > +/* VTTBR mask cannot be determined in complie time under ARMv8 */
> > +static u64 vttbr_baddr_mask;
> > +
> > static bool vgic_present;
> >
> > static void kvm_arm_set_running_vcpu(struct kvm_vcpu *vcpu)
> > @@ -412,6 +416,75 @@ static bool need_new_vmid_gen(struct kvm *kvm)
> > }
> >
> > /**
> > + * set_vttbr_baddr_mask - set mask value for vttbr base address
> > + *
> > + * In ARMv8, vttbr_baddr_mask cannot be determined in compile time since stage2
>
> the stage2 input address size

Okay.

> > + * input address size depends on hardware capability. Thus, it is needed to read
>
> Thus, we first need to read... considering both the translation granule
> and the level...

Okay.

> > + * ID_AA64MMFR0_EL1.PARange first and then set vttbr_baddr_mask with consideration
> > + * of both granule size and the level of translation tables.
> > + */
> > +static int set_vttbr_baddr_mask(void)
> > +{
> > +#ifndef CONFIG_ARM64
>
> We have completely avoided this kind of ifdef's so far.
>
> The end calculation of the alignment requirements for the VTTBR.BADDR
> field is the same for arm and arm64, so either providing a lookup table or
> static inlines in kvm_arm.h for the two archs should work.

I see. I will write this logic in header files.

> > + vttbr_baddr_mask = VTTBR_BADDR_MASK;
> > +#else
> > + int pa_range, t0sz, vttbr_x;
> > +
> > + pa_range = read_cpuid(ID_AA64MMFR0_EL1) & 0xf;
> > +
> > + switch (pa_range) {
> > + case 0:
> > + t0sz = VTCR_EL2_T0SZ(32);
> > + break;
> > + case 1:
> > + t0sz = VTCR_EL2_T0SZ(36);
> > + break;
> > + case 2:
> > + t0sz = VTCR_EL2_T0SZ(40);
> > + break;
> > + case 3:
> > + t0sz = VTCR_EL2_T0SZ(42);
> > + break;
> > + case 4:
> > + t0sz = VTCR_EL2_T0SZ(44);
> > + break;
> > + default:
> > + t0sz = VTCR_EL2_T0SZ(48);
>
> why default? this would be 'case 5', and then
>
> default:
> kvm_err("Unknown PARange: %d, hardware is weird\n", pa_range);
> return -EFAULT;

Okay, I will change it.

> > + }
> > +
> > + /*
> > + * See Table D4-23 and Table D4-25 in ARM DDI 0487A.b to figure out
> > + * the origin of the hardcoded values, 38 and 37.
> > + */
> > +#ifdef CONFIG_ARM64_64K_PAGES
> > + /*
> > + * 16 <= T0SZ <= 21 is valid under 3 level of translation tables
> > + * 18 <= T0SZ <= 34 is valid under 2 level of translation tables
> > + * 31 <= T0SZ <= 39 is valid under 1 level of transltaion tables
> > + */
> > + if (t0sz <= 17) {
> > + kvm_err("Cannot support %d-bit address space\n", 64 - t0sz);
> > + return -EINVAL;
> > + }
>
> I don't think this is what we want. You want to adjust your initial
> lookup level (VTCR_EL2.SL0) accordingly.

My intention is not to adjust lookup level in runtime. Since kvm_mmu.c has
an assumption on lookup level, SL0 could be set in compile time.

> > + vttbr_x = 38 - t0sz;
> > +#else
> > + /*
> > + * 16 <= T0SZ <= 24 is valid under 4 level of translation tables
> > + * 21 <= T0SZ <= 30 is valid under 3 level of translation tables
> > + * 30 <= T0SZ <= 39 is valid under 2 level of translation tables
> > + */
> > + if (t0sz <= 20) {
> > + kvm_err("Cannot support %d-bit address space\n", 64 - t0sz);
> > + return -EINVAL;
> > + }
>
> same as above
>
> > + vttbr_x = 37 - t0sz;
> > +#endif
> > + vttbr_baddr_mask = (((1LLU << (48 - vttbr_x)) - 1) << (vttbr_x - 1));
> > +#endif
> > + return 0;
> > +}
> > +
> > +/**
> > * update_vttbr - Update the VTTBR with a valid VMID before the guest runs
> > * @kvm The guest that we are about to run
> > *
> > @@ -465,7 +538,7 @@ static void update_vttbr(struct kvm *kvm)
> > /* update vttbr to be used with the new vmid */
> > pgd_phys = virt_to_phys(kvm->arch.pgd);
> > vmid = ((u64)(kvm->arch.vmid) << VTTBR_VMID_SHIFT) & VTTBR_VMID_MASK;
> > - kvm->arch.vttbr = pgd_phys & VTTBR_BADDR_MASK;
> > + kvm->arch.vttbr = pgd_phys & vttbr_baddr_mask;
>
> We should really check that we're not actually masking off any set bits
> in pgd_phys here, because then I think we're overwriting kernel memory,
> which would be bad.
>
> See my other comments above, I think we need a more flexible scheme for
> allocating the pdg, and if not (if we stick to never using concatenated
> initial level stage-2 page tables), then this should be a check and a
> BUG_ON() instead of just a mask. Right?

Right.

> > kvm->arch.vttbr |= vmid;
> >
> > spin_unlock(&kvm_vmid_lock);
> > @@ -1051,6 +1124,12 @@ int kvm_arch_init(void *opaque)
> > }
> > }
> >
> > + err = set_vttbr_baddr_mask();
> > + if (err) {
> > + kvm_err("Cannot set vttbr_baddr_mask\n");
> > + return -EINVAL;
> > + }
> > +
> > cpu_notifier_register_begin();
> >
> > err = init_hyp_mode();
> > @@ -1068,6 +1147,7 @@ int kvm_arch_init(void *opaque)
> > hyp_cpu_pm_init();
> >
> > kvm_coproc_table_init();
> > +
> > return 0;
> > out_err:
> > cpu_notifier_register_done();
> > diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
> > index 3d69030..8dbef70 100644
> > --- a/arch/arm64/include/asm/kvm_arm.h
> > +++ b/arch/arm64/include/asm/kvm_arm.h
> > @@ -94,7 +94,6 @@
> > /* TCR_EL2 Registers bits */
> > #define TCR_EL2_TBI (1 << 20)
> > #define TCR_EL2_PS (7 << 16)
> > -#define TCR_EL2_PS_40B (2 << 16)
> > #define TCR_EL2_TG0 (1 << 14)
> > #define TCR_EL2_SH0 (3 << 12)
> > #define TCR_EL2_ORGN0 (3 << 10)
> > @@ -103,8 +102,6 @@
> > #define TCR_EL2_MASK (TCR_EL2_TG0 | TCR_EL2_SH0 | \
> > TCR_EL2_ORGN0 | TCR_EL2_IRGN0 | TCR_EL2_T0SZ)
> >
> > -#define TCR_EL2_FLAGS (TCR_EL2_PS_40B)
> > -
> > /* VTCR_EL2 Registers bits */
> > #define VTCR_EL2_PS_MASK (7 << 16)
> > #define VTCR_EL2_TG0_MASK (1 << 14)
> > @@ -119,36 +116,28 @@
> > #define VTCR_EL2_SL0_MASK (3 << 6)
> > #define VTCR_EL2_SL0_LVL1 (1 << 6)
> > #define VTCR_EL2_T0SZ_MASK 0x3f
> > -#define VTCR_EL2_T0SZ_40B 24
> > +#define VTCR_EL2_T0SZ(bits) (64 - (bits))
> >
> > #ifdef CONFIG_ARM64_64K_PAGES
> > /*
> > * Stage2 translation configuration:
> > - * 40bits output (PS = 2)
> > - * 40bits input (T0SZ = 24)
> > * 64kB pages (TG0 = 1)
> > * 2 level page tables (SL = 1)
> > */
> > #define VTCR_EL2_FLAGS (VTCR_EL2_TG0_64K | VTCR_EL2_SH0_INNER | \
> > VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
> > - VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
> > -#define VTTBR_X (38 - VTCR_EL2_T0SZ_40B)
> > + VTCR_EL2_SL0_LVL1)
> > #else
> > /*
> > * Stage2 translation configuration:
> > - * 40bits output (PS = 2)
> > - * 40bits input (T0SZ = 24)
> > * 4kB pages (TG0 = 0)
> > * 3 level page tables (SL = 1)
> > */
> > #define VTCR_EL2_FLAGS (VTCR_EL2_TG0_4K | VTCR_EL2_SH0_INNER | \
> > VTCR_EL2_ORGN0_WBWA | VTCR_EL2_IRGN0_WBWA | \
> > - VTCR_EL2_SL0_LVL1 | VTCR_EL2_T0SZ_40B)
> > -#define VTTBR_X (37 - VTCR_EL2_T0SZ_40B)
> > + VTCR_EL2_SL0_LVL1)
> > #endif
> >
> > -#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
> > -#define VTTBR_BADDR_MASK (((1LLU << (40 - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
> > #define VTTBR_VMID_SHIFT (48LLU)
> > #define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT)
> >
> > diff --git a/arch/arm64/kvm/hyp-init.S b/arch/arm64/kvm/hyp-init.S
> > index d968796..c0f7634 100644
> > --- a/arch/arm64/kvm/hyp-init.S
> > +++ b/arch/arm64/kvm/hyp-init.S
> > @@ -63,17 +63,21 @@ __do_hyp_init:
> > mrs x4, tcr_el1
> > ldr x5, =TCR_EL2_MASK
> > and x4, x4, x5
> > - ldr x5, =TCR_EL2_FLAGS
> > - orr x4, x4, x5
> > - msr tcr_el2, x4
> > -
> > - ldr x4, =VTCR_EL2_FLAGS
> > /*
> > * Read the PARange bits from ID_AA64MMFR0_EL1 and set the PS bits in
> > - * VTCR_EL2.
> > + * TCR_EL2 and both PS bits and T0SZ bits in VTCR_EL2.
>
> and the PS and T0SZ bits in VTCR_EL2.

Okay.

> > */
> > mrs x5, ID_AA64MMFR0_EL1
> > bfi x4, x5, #16, #3
> > + msr tcr_el2, x4
>
> put a comment: // set TCR_EL2.PS to ID_AA64MMFR0_EL1.PARange

I will add it.

>
> > +
> > + ldr x4, =VTCR_EL2_FLAGS
> > + bfi x4, x5, #16, #3
>
> put the same comment here, except that it is VTCR_EL2.PS

I will add it.

- Jungseok Lee



\
 
 \ /
  Last update: 2014-06-02 10:21    [W:0.066 / U:0.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site