lkml.org 
[lkml]   [2014]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/4] ARM: debug: qcom: add UART addresses to Kconfig help
On 05/26/2014 08:17 PM, Matthias Brugger wrote:
> 2014-05-26 15:45 GMT+02:00 Georgi Djakov <gdjakov@mm-sol.com>:
>> On 23.05.14, 19:39, Matthias Brugger wrote:
>>>
>>> 2014-05-23 17:12 GMT+02:00 Georgi Djakov <gdjakov@mm-sol.com>:
>>>>
>>>> Add information about the APQ8084 debug UART physical and virtual
>>>> addresses in the DEBUG_QCOM_UARTDM Kconfig help section.
>>>> Requires: https://lkml.org/lkml/2014/4/14/312
>>>>
>>>> Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com>
>>>> ---
>>>> arch/arm/Kconfig.debug | 1 +
>>>> 1 file changed, 1 insertion(+)
>>>>
>>>> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
>>>> index 40ee328..e71723d 100644
>>>> --- a/arch/arm/Kconfig.debug
>>>> +++ b/arch/arm/Kconfig.debug
>>>> @@ -376,6 +376,7 @@ choice
>>>> their output to the serial port on Qualcomm devices.
>>>>
>>>> ARCH DEBUG_UART_PHYS DEBUG_UART_BASE
>>>> + APQ8084 0xf995e000 0xfa75e000
>>>> MSM8X60 0x19c40000 0xf0040000
>>>> MSM8960 0x16440000 0xf0040000
>>>> MSM8974 0xf991e000 0xfa71e000
>>>
>>>
>>> You don't have any uart defined in your dts. You should add them
>>> before any adding low level debug support.
>>> Otherwise there might be problems in booting a multi-platform kernel.
>>>
>>
>> Thanks for the comment! As the uart depends on clocks, i am adding it to the
>> dts as part of my global clock controller patchset [1].
>> In this patch i am just adding some information to the help section.
>> Do you see any problem with this?
>
> Are the patches for the clock controller applied already?
> If not, I would consider to add this patch to clock controller series.
>

No, they are not applied yet. The uart dts definition depends on clocks, but the
DEBUG_LL support does not. And the DEBUG_LL support is already there as it is
common with other SoCs. I am sorry, but i don't see dependency between the dts
definition and this patch. Could you explain please?

Thanks,
Georgi



\
 
 \ /
  Last update: 2014-05-27 14:41    [W:0.072 / U:1.776 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site