Messages in this thread | | | Date | Mon, 19 May 2014 14:52:03 +0800 | From | Liu Ying <> | Subject | Re: [PATCH v3] pwm: i.MX: Avoid sample FIFO overflow for i.MX PWM version2 |
| |
Hi Lothar,
Thanks for your review.
On 05/19/2014 01:53 PM, Lothar Waßmann wrote: > Hi, > > Liu Ying wrote: > [...] >> @@ -30,6 +32,7 @@ >> /* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ >> >> #define MX3_PWMCR 0x00 /* PWM Control Register */ >> +#define MX3_PWMIR 0x08 /* PWM Interrupt Register */ >> #define MX3_PWMSAR 0x0C /* PWM Sample Register */ >> #define MX3_PWMPR 0x10 /* PWM Period Register */ >> #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) >> @@ -38,7 +41,12 @@ >> #define MX3_PWMCR_DBGEN (1 << 22) >> #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) >> #define MX3_PWMCR_CLKSRC_IPG (1 << 16) >> +#define MX3_PWMCR_SWR (1 << 3) >> #define MX3_PWMCR_EN (1 << 0) >> +#define MX3_PWMSR_ROV (1 << 4) >> +#define MX3_PWMIR_RIE (1 << 1) >> + > You should decide whether to use tabs or spaces for indentation. > And probably cleanup the indentation of the existing definitions to use > all the same indentation style.
Ok, I will generate a separate patch to cleanup the indentation for the existing register definitions of both i.MX PWMv1 and PWMv2.
> >> @@ -128,6 +160,13 @@ static int imx_pwm_config_v2(struct pwm_chip *chip, >> else >> period_cycles = 0; >> >> + if (!enable || duty_cycles == 0) >> + imx_pwm_software_reset_v2(chip); >> + else if (readl(imx->mmio_base + MX3_PWMSAR)) >> + /* No rollover irq generated if duty peroid is zero. */ > typo: 'period'.
I will fix this.
> >> @@ -135,27 +174,55 @@ static int imx_pwm_config_v2(struct pwm_chip *chip, >> MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | >> MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH; >> >> - if (test_bit(PWMF_ENABLED, &pwm->flags)) >> + if (enable) >> cr |= MX3_PWMCR_EN; >> >> writel(cr, imx->mmio_base + MX3_PWMCR); >> >> + if (enable && duty_cycles) >> + /* No rollover irq generated if duty peroid is zero. */ > dto.
I will fix this.
> > > Lothar Waßmann >
-- Liu Ying -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |