lkml.org 
[lkml]   [2014]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [RFC PATCH 2/5] clk: Introduce 'clk_round_rate_nearest()'
Hi Sören,

On Sun, May 18, 2014 at 05:51:05PM -0700, Sören Brinkmann wrote:
> ------------------8<-----------------8<---------------------8<-------------8<---
> From: Soren Brinkmann <soren.brinkmann@xilinx.com>
> Date: Tue, 2 Apr 2013 10:08:13 -0700
> Subject: [PATCH] clk: Introduce 'clk_round_rate_nearest()'
>
> Introduce a new API function to round a rate to the closest possible
> rate the HW clock can generate.
> In contrast to 'clk_round_rate()' which works similar, but always returns
> a frequency <= its input rate.
>
> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
> ---
> drivers/clk/clk.c | 43 +++++++++++++++++++++++++++++++++++++++++--
> include/linux/clk.h | 14 ++++++++++++--
> 2 files changed, 53 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index dff0373f53c1..faf24d0569df 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1011,8 +1011,9 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate)
> * @rate: the rate which is to be rounded
> *
> * Takes in a rate as input and rounds it to a rate that the clk can actually
> - * use which is then returned. If clk doesn't support round_rate operation
> - * then the parent rate is returned.
> + * use and does not exceed the requested frequency, which is then returned.
> + * If clk doesn't support round_rate operation then the parent rate
> + * is returned.
> */
> long clk_round_rate(struct clk *clk, unsigned long rate)
> {
> @@ -1027,6 +1028,44 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
> EXPORT_SYMBOL_GPL(clk_round_rate);
>
> /**
> + * clk_round_rate_nearest - round the given rate for a clk
> + * @clk: the clk for which we are rounding a rate
> + * @rate: the rate which is to be rounded
> + *
> + * Takes in a rate as input and rounds it to the closest rate that the clk
> + * can actually use which is then returned. If clk doesn't support
> + * round_rate operation then the parent rate is returned.
> + */
> +long clk_round_rate_nearest(struct clk *clk, unsigned long rate)
Why does this function doesn't return an unsigned long when it never
returns a negative value? Ditto for clk_round_rate?

> +{
> + unsigned long lower, upper, cur, lower_last, upper_last;
> +
> + lower = clk_round_rate(clk, rate);
> + if (lower >= rate)
> + return lower;
Is the >-case worth a warning?

> +
> + upper = clk_round_rate(clk, rate + rate - lower);
This was parenthesized in my original patch on purpose. If rate is big

rate + rate - lower

might overflow when

rate + (rate - lower)

doesn't. Thinking again, there is no real problem, because this is
unsigned arithmetic. To be save we still need to check if rate + (rate -
lower) overflows.

> + if (upper == lower)
if (upper <= rate) is the better check here. (= would be a bug.)

> + return upper;
> +
> + lower = rate + 1;
ok, so your loop invariant is that the best freq is in [lower; upper].

> + do {
> + upper_last = upper;
> + lower_last = lower;
> +
> + cur = clk_round_rate(clk, lower + ((upper - lower) >> 1));
> + if (cur < lower)
> + lower += (upper - lower) >> 1;
You already know that lower + ((upper - lower) >> 1) is too small, so
you can better do

lower += ((upper - lower) >> 1) + 1;

> + else
> + upper = cur;
> +
> + } while (lower_last != lower && upper_last != upper);
> +
> + return upper;
> +}
> +EXPORT_SYMBOL_GPL(clk_round_rate_nearest);
I think the function still has potential for optimisation, what about:

unsigned long clk_round_rate_nearest(struct clk *clk, unsigned long rate)
{
unsigned long lower, upper, rounded;

rounded = clk_round_rate(clk, rate);

if (rounded >= rate)
return rounded;

/*
* rounded is the best approximation for rate that is not
* bigger than rate. If there is a better one, it must be in the
* interval (rate; rate + (rate - rounded)).
* Note that the upper limit isn't better than rate itself, so
* that one doesn't need to be considered.
*/

upper = rate + (rate - rounded) - 1;
if (upper < rate)
upper = ULONG_MAX;

upper = clk_round_rate(clk, upper);

lower = rate + 1;

/*
* If there is a better approximation than clk_round_rate(clk,
* rate), it is in the interval [lower, upper]. Otherwise all
* values in this interval yield clk_round_rate(clk, rate).
*/
while (lower < upper) {
unsigned long mid;

mid = lower + (upper - lower) >> 1;
rounded = clk_round_rate(clk, mid);

if (rounded < rate) {
/* implies rounded == clk_round_rate(clk, rate); */
lower = mid + 1;
} else {
/*
* rounded is a better approximation than lower
* assuming that rounded <= mid
*/
upper = rounded;
}
}

/*
* upper is always assigned a return value from clk_round_rate,
* so it's suitable for direct return.
*/
return upper;
}

? Note this is not even compile tested ...


> +
> +/**
> * __clk_notify - call clk notifier chain
> * @clk: struct clk * that is changing rate
> * @msg: clk notifier type (see include/linux/clk.h)
> diff --git a/include/linux/clk.h b/include/linux/clk.h
> index fb5e097d8f72..2f83bf030ac6 100644
> --- a/include/linux/clk.h
> +++ b/include/linux/clk.h
> @@ -255,15 +255,25 @@ void devm_clk_put(struct device *dev, struct clk *clk);
>
>
> /**
> - * clk_round_rate - adjust a rate to the exact rate a clock can provide
> + * clk_round_rate - round a rate to the exact rate a clock can provide not
> + * exceeding @rate
> * @clk: clock source
> * @rate: desired clock rate in Hz
> *
> - * Returns rounded clock rate in Hz, or negative errno.
> + * Returns rounded clock rate in Hz, or parent rate
> */
I'd put the changes in this hunk up to here into a separate patch.

Best regards
Uwe

> long clk_round_rate(struct clk *clk, unsigned long rate);
>
> /**
> + * clk_round_rate_nearest - round a rate to the exact rate a clock can provide
> + * @clk: the clk for which we are rounding a rate
> + * @rate: the rate which is to be rounded
> + *
> + * Returns rounded clock rate in Hz, or parent rate
> + */
> +long clk_round_rate_nearest(struct clk *clk, unsigned long rate);
> +
> +/**
> * clk_set_rate - set the clock rate for a clock source
> * @clk: clock source
> * @rate: desired clock rate in Hz
> --
> 1.9.3.1.ga73a6ad
>
>
>

--
Pengutronix e.K. | Uwe Kleine-König |
Industrial Linux Solutions | http://www.pengutronix.de/ |
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-05-19 19:01    [W:0.240 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site