lkml.org 
[lkml]   [2014]   [May]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/2] irqchip: gic: preserve gic V2 bypass bits in cpu ctrl register
Date
On Fri, May 16 2014 at 11:20:13 pm BST, Feng Kan <fkan@apm.com> wrote:
> This change is made to preserve the GIC v2 bypass bits in the
> GIC_CPU_CTRL register (also known as the GICC_CTLR register in spec).
> This code will preserve all bits configured by the bootloader regarding
> v2 bypass group bits. In the X-Gene platform, the bypass functionality
> is not used and bypass bits should not be changed by the kernel gic
> code as it could lead to incorrect behavior.
>
> Signed-off-by: Vinayak Kale <vkale@apm.com>
> Signed-off-by: Feng Kan <fkan@apm.com>
> Reviewed-by: Anup Patel <apatel@apm.com>
> ---
> drivers/irqchip/irq-gic.c | 29 ++++++++++++++++++++++++++---
> 1 file changed, 26 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
> index e6698a2..9840ddc 100644
> --- a/drivers/irqchip/irq-gic.c
> +++ b/drivers/irqchip/irq-gic.c
> @@ -61,6 +61,7 @@
> #define GIC_INT_DISABLE_MASK 0xffffffff
> #define GIC_INT_SGI_MASK 0x0000ffff
> #define GIC_INT_LVL_TRIGGER 0x0
> +#define GIC_DIS_BYPASS_MASK 0x1e0
>
> union gic_base {
> void __iomem *common_base;
> @@ -391,6 +392,20 @@ static u8 gic_get_cpumask(struct gic_chip_data *gic)
> return mask;
> }
>
> +static void gic_cpu_if_up(void)
> +{
> + void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
> + u32 bypass;
> +
> + /*
> + * Preserve bypass disable bits to be written back later
> + */
> + bypass = readl(cpu_base + GIC_CPU_CTRL);
> + bypass &= GIC_DIS_BYPASS_MASK;
> +
> + writel_relaxed(bypass | GIC_CPU_ENABLE, cpu_base + GIC_CPU_CTRL);
> +}
> +
> static void __init gic_dist_init(struct gic_chip_data *gic)
> {
> unsigned int i;
> @@ -471,13 +486,21 @@ static void gic_cpu_init(struct gic_chip_data *gic)
> dist_base + GIC_DIST_PRI + i * 4 / 4);
>
> writel_relaxed(GIC_INT_PRI_THRESHOLD, base + GIC_CPU_PRIMASK);
> - writel_relaxed(GIC_CPU_ENABLE, base + GIC_CPU_CTRL);
> + gic_cpu_if_up();
> }
>
> void gic_cpu_if_down(void)
> {
> void __iomem *cpu_base = gic_data_cpu_base(&gic_data[0]);
> - writel_relaxed(GIC_CPU_DISABLE, cpu_base + GIC_CPU_CTRL);
> + u32 bypass;
> +
> + /*
> + * Preserve bypass disable bits to be written back later
> + */
> + bypass = readl(cpu_base + GIC_CPU_CTRL);
> + bypass &= GIC_DIS_BYPASS_MASK;
> +
> + writel_relaxed(bypass | GIC_CPU_DISABLE, cpu_base + GIC_CPU_CTRL);

Given that on the way down, you know that the configuration is sane, you
can write this as:

val = readl(cpu_base + GIC_CPU_CTRL);
val &= ~GIC_CPU_ENABLE;
writel_relaxed(val, cpu_base + GIC_CPU_CTRL);

I think it looks a bit better.

> }
>
> #ifdef CONFIG_CPU_PM
> @@ -613,7 +636,7 @@ static void gic_cpu_restore(unsigned int gic_nr)
> dist_base + GIC_DIST_PRI + i * 4);
>
> writel_relaxed(GIC_INT_PRI_THRESHOLD, cpu_base + GIC_CPU_PRIMASK);
> - writel_relaxed(GIC_CPU_ENABLE, cpu_base + GIC_CPU_CTRL);
> + gic_cpu_if_up();

Have you tested the save/restore path? It seems that we dont save
GICC_CTLR, so it may not do what you think it will...

> }
>
> static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)

--
Jazz is not dead. It just smells funny.


\
 
 \ /
  Last update: 2014-05-19 12:21    [W:0.081 / U:0.396 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site