lkml.org 
[lkml]   [2014]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 05/10] thermal: exynos: remove redundant pdata checks from exynos_tmu_initialize()
Date
On Thursday, May 15, 2014 10:47:40 AM Eduardo Valentin wrote:
> Hello Bartlomiej,

Hi,

> On Mon, May 05, 2014 at 01:15:34PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > Remove runtime checks for pdata sanity from exynos_tmu_initialize().
> > The current values hardcoded in pdata will never trigger the checks
> > and for the new code potential mistakes should be caught during
> > development/review phases.
> >
> > There should be no functional changes caused by this patch.
> >
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > ---
> > drivers/thermal/samsung/exynos_thermal_common.h | 1 -
> > drivers/thermal/samsung/exynos_tmu.c | 13 -------------
> > 2 files changed, 14 deletions(-)
> >
> > diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
> > index 3eb2ed9..cd44719 100644
> > --- a/drivers/thermal/samsung/exynos_thermal_common.h
> > +++ b/drivers/thermal/samsung/exynos_thermal_common.h
> > @@ -27,7 +27,6 @@
> > #define SENSOR_NAME_LEN 16
> > #define MAX_TRIP_COUNT 8
> > #define MAX_COOLING_DEVICE 4
> > -#define MAX_THRESHOLD_LEVS 5
> >
> > #define ACTIVE_INTERVAL 500
> > #define IDLE_INTERVAL 10000
> > diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
> > index 903566f..789d745 100644
> > --- a/drivers/thermal/samsung/exynos_tmu.c
> > +++ b/drivers/thermal/samsung/exynos_tmu.c
> > @@ -158,23 +158,10 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
> > data->temp_error > pdata->max_efuse_value)
> > data->temp_error = pdata->efuse_value & EXYNOS_TMU_TEMP_MASK;
> >
> > - if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
> > - dev_err(&pdev->dev, "Invalid max trigger level\n");
> > - ret = -EINVAL;
> > - goto out;
> > - }
> > -
> > for (i = 0; i < pdata->max_trigger_level; i++) {
> > if (!pdata->trigger_levels[i])
> > continue;
> >
> > - if ((pdata->trigger_type[i] == HW_TRIP) &&
> > - (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
> > - dev_err(&pdev->dev, "Invalid hw trigger level\n");
> > - ret = -EINVAL;
> > - goto out;
> > - }
> > -
>
> Does it mean no new pdata are going to be written? i.e., no new soc is
> going to be supported by this driver that needs proper pdata checking?

This is not a proper checking. The checks in question are done at runtime
in a production code for data that is hardcoded inside driver during
development time and later it doesn't change. Such data should be verified
during development and review time (i.e. by a script parsing relevant data
from exynos_tmu_data.c, one can also argue that verification to be done is
so simple that the review by a maintainer should be enough).

> > /* Count trigger levels except the HW trip*/
> > if (!(pdata->trigger_type[i] == HW_TRIP))
> > trigger_levs++;

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics



\
 
 \ /
  Last update: 2014-05-15 18:41    [W:0.080 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site