Messages in this thread | | | Date | Tue, 13 May 2014 14:05:28 +0200 | From | Patrice Chotard <> | Subject | Re: [STLinux Kernel] [PATCH v4 6/6] ARM: dts: STiH407: Add B2120 board support |
| |
On 03/12/2014 09:50 AM, Maxime COQUELIN wrote: > B2120 HDK is the reference board for STiH407 SoC. > It has the following characteristics: > - 1GB DDR3 > - 8GB eMMC / SD-Card slot > - 32MB NOR Flash > - 1 x Gbit Ethernet > - 1 x USB 3.0 port > - 1 x Mini-PCIe > - 1 x SATA > - 1 x HDMI output > - 1 x HDMI input > - 1 x SPDIF > > This patch only introduces basic functionnalities, such as I2C and UART. > > Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> > Acked-by: Lee Jones <lee.jones@linaro.org> > Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> > Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> > --- > arch/arm/boot/dts/Makefile | 3 +- > arch/arm/boot/dts/stih407-b2120.dts | 78 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 80 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/boot/dts/stih407-b2120.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 12455cf..f760a88 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -317,7 +317,8 @@ dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb > dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ > stih416-b2000.dtb \ > stih415-b2020.dtb \ > - stih416-b2020.dtb > + stih416-b2020.dtb \ > + stih407-b2120.dtb > dtb-$(CONFIG_ARCH_SUNXI) += \ > sun4i-a10-a1000.dtb \ > sun4i-a10-cubieboard.dtb \ > diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts > new file mode 100644 > index 0000000..9c97da4 > --- /dev/null > +++ b/arch/arm/boot/dts/stih407-b2120.dts > @@ -0,0 +1,78 @@ > +/* > + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. > + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > +/dts-v1/; > +#include "stih407.dtsi" > +/ { > + model = "STiH407 B2120"; > + compatible = "st,stih407", "st,stih407-b2120"; > + > + chosen { > + bootargs = "console=ttyAS0,115200"; > + linux,stdout-path = &sbc_serial0; > + }; > + > + memory { > + device_type = "memory"; > + reg = <0x40000000 0x80000000>; > + }; > + > + aliases { > + ttyAS0 = &sbc_serial0; > + }; > + > + soc { > + sbc_serial0: serial@9530000 { > + status = "okay"; > + }; > + > + leds { > + compatible = "gpio-leds"; > + red { > + #gpio-cells = <2>; > + label = "Front Panel LED"; > + gpios = <&PIO4 1 0>; > + linux,default-trigger = "heartbeat"; > + }; > + green { > + #gpio-cells = <2>; > + gpios = <&PIO1 3 0>; > + default-state = "off"; > + }; > + }; > + > + i2c@9842000 { > + status = "okay"; > + }; > + > + i2c@9843000 { > + status = "okay"; > + }; > + > + i2c@9844000 { > + status = "okay"; > + }; > + > + i2c@9845000 { > + status = "okay"; > + }; > + > + i2c@9540000 { > + status = "okay"; > + }; > + > + /* SSC11 to HDMI */ > + i2c@9541000 { > + status = "okay"; > + /* HDMI V1.3a supports Standard mode only */ > + clock-frequency = <100000>; > + st,i2c-min-scl-pulse-width-us = <0>; > + st,i2c-min-sda-pulse-width-us = <5>; > + }; > + }; > +};
Acked-by: Patrice Chotard <patrice.chotard@st.com>
| |