lkml.org 
[lkml]   [2014]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[RFC PATCH] vmscan: memcg: Always use swappiness of the reclaimed memcg swappiness and oom_control
On Thu 24-04-14 08:19:17, Johannes Weiner wrote:
> On Fri, Apr 18, 2014 at 01:36:11PM +0200, Michal Hocko wrote:
> > On Wed 16-04-14 17:13:18, Johannes Weiner wrote:
> > > Per-memcg swappiness and oom killing can currently not be tweaked on a
> > > memcg that is part of a hierarchy, but not the root of that hierarchy.
> > > Users have complained that they can't configure this when they turned
> > > on hierarchy mode. In fact, with hierarchy mode becoming the default,
> > > this restriction disables the tunables entirely.
> >
> > Except when we would handle the first level under root differently,
> > which is ugly.
> >
> > > But there is no good reason for this restriction.
> >
> > I had a patch for this somewhere on the think_more pile. I wasn't
> > particularly happy about the semantic so I haven't posted it.
> >
> > > The settings for
> > > swappiness and OOM killing are taken from whatever memcg whose limit
> > > triggered reclaim and OOM invocation, regardless of its position in
> > > the hierarchy tree.
> >
> > This is OK for the OOM knob because the memory pressure cannot be
> > handled at that level in hierarchy and that is where the OOM happens.
> >
> > I am not so sure about the swappiness though. The swappiness tells us
> > how to proportionally scan anon vs. file LRUs and those are per-memcg,
> > not per-hierarchy (unlike the charge) so it makes sense to use it
> > per-memcg IMO.
> >
> > Besides that using the reclaim target value might be quite confusing.
> > Say, somebody wants to prevent from swapping in a certain group and
> > yet the pages find their way to swap depending on where the reclaim is
> > triggered from.
> > Another thing would be that setting swappiness on an unlimited group has
> > no effect although I would argue it makes some sense in configuration
> > when parent is controlled by somebody else. I would like to tell how
> > to reclaim me when I cannot say how much memory I can have.
> >
> > It is true that we have a different behavior for the global reclaim
> > already but I am not entirely happy about that. Having a different
> > behavior for the global vs. limit reclaims just calls for troubles and
> > should be avoided as much as possible.
> >
> > So let's think what is the best semantic before we merge this. I would
> > be more inclined for using per-memcg swappiness all the time (root using
> > the global knob) for all reclaims.
>
> Yeah, we've always used the triggering group's swappiness value but at
> the same time forced the whole hierarchy to have the same setting as
> the root.
>
> I don't really feel strongly about this. If you prefer the per-memcg
> swappiness I can send a followup patch - or you can.

OK, I originally thought this would be in the same patch but now that I
think about it some more it would be better to have it separate in case
it turns out this will cause some issues (at least
global_reclaim-always-use-global-vm_swappiness is a behavior change).
So what do you think about this?
---
From 3a865b7b53aed96d93bbcf865028e63fd6f582ab Mon Sep 17 00:00:00 2001
From: Michal Hocko <mhocko@suse.cz>
Date: Thu, 24 Apr 2014 15:28:05 +0200
Subject: [RFC PATCH] vmscan: memcg: Always use swappiness of the reclaimed memcg

The memory reclaim always uses swappiness of the reclaim target memcg
(origin of the memory pressure) or vm_swappiness for the global memory
reclaim. This behavior was consistent (except for difference between
global and hard limit reclaim) because swappiness was enforced to be
consistent within each memcg hierarchy.

After "mm: memcontrol: remove hierarchy restrictions for swappiness
and oom_control" each memcg can have its own swappiness independent on
hierarchical parents, though, so the consistency guarantee is gone.
This can lead to an unexpected behavior. Say that a group is explicitly
configured to not swapout by memory.swappiness=0 but its memory gets
swapped out anyway when the memory pressure comes from its parent with a
different swapping policy.
It is also unexpected that the knob is meaningless without setting the
hard limit which would trigger the reclaim and enforce the swappiness.
There are setups where the hard limit is configured higher in the
hierarchy by an administrator and children groups are under control of
somebody else who is interested in the swapout behavior but not
necessarily about the memory limit.

From a semantic point of view swappiness is an attribute defining
anon vs. file proportional scanning of LRU which is memcg specific
(unlike charges which are propagated up the hierarchy) so it should be
applied to the particular memcg's LRU regardless where the memory
pressure comes from.

This patch removes vmscan_swappiness() and stores the swappiness into
the scan_control structure. mem_cgroup_swappiness is then used to
provide the correct value before shrink_lruvec is called. The global
vm_swappiness is used for the root memcg.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
---
Documentation/cgroups/memory.txt | 15 +++++++--------
mm/vmscan.c | 18 ++++++++----------
2 files changed, 15 insertions(+), 18 deletions(-)

diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 4937e6fff9b4..b3429aec444c 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -540,14 +540,13 @@ Note:

5.3 swappiness

-Similar to /proc/sys/vm/swappiness, but only affecting reclaim that is
-triggered by this cgroup's hard limit. The tunable in the root cgroup
-corresponds to the global swappiness setting.
-
-Please note that unlike the global swappiness, memcg knob set to 0
-really prevents from any swapping even if there is a swap storage
-available. This might lead to memcg OOM killer if there are no file
-pages to reclaim.
+Overrides /proc/sys/vm/swappiness for the particular group. The tunable
+in the root cgroup corresponds to the global swappiness setting.
+
+Please note that unlike during the global reclaim, limit reclaim
+enforces that 0 swappiness really prevents from any swapping even if
+there is a swap storage available. This might lead to memcg OOM killer
+if there are no file pages to reclaim.

5.4 failcnt

diff --git a/mm/vmscan.c b/mm/vmscan.c
index 310e1f67625e..7d2f8226cbd0 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -86,6 +86,9 @@ struct scan_control {
/* Scan (total_size >> priority) pages at once */
int priority;

+ /* anon vs. file LRUs scanning "ratio" */
+ int swappiness;
+
/*
* The memory cgroup that hit its limit and as a result is the
* primary target of this reclaim invocation.
@@ -1833,13 +1836,6 @@ static unsigned long shrink_list(enum lru_list lru, unsigned long nr_to_scan,
return shrink_inactive_list(nr_to_scan, lruvec, sc, lru);
}

-static int vmscan_swappiness(struct scan_control *sc)
-{
- if (global_reclaim(sc))
- return vm_swappiness;
- return mem_cgroup_swappiness(sc->target_mem_cgroup);
-}
-
enum scan_balance {
SCAN_EQUAL,
SCAN_FRACT,
@@ -1900,7 +1896,7 @@ static void get_scan_count(struct lruvec *lruvec, struct scan_control *sc,
* using the memory controller's swap limit feature would be
* too expensive.
*/
- if (!global_reclaim(sc) && !vmscan_swappiness(sc)) {
+ if (!global_reclaim(sc) && !sc->swappiness) {
scan_balance = SCAN_FILE;
goto out;
}
@@ -1910,7 +1906,7 @@ static void get_scan_count(struct lruvec *lruvec, struct scan_control *sc,
* system is close to OOM, scan both anon and file equally
* (unless the swappiness setting disagrees with swapping).
*/
- if (!sc->priority && vmscan_swappiness(sc)) {
+ if (!sc->priority && sc->swappiness) {
scan_balance = SCAN_EQUAL;
goto out;
}
@@ -1935,7 +1931,7 @@ static void get_scan_count(struct lruvec *lruvec, struct scan_control *sc,
* With swappiness at 100, anonymous and file have the same priority.
* This scanning priority is essentially the inverse of IO cost.
*/
- anon_prio = vmscan_swappiness(sc);
+ anon_prio = sc->swappiness;
file_prio = 200 - anon_prio;

/*
@@ -2221,6 +2217,7 @@ static void shrink_zone(struct zone *zone, struct scan_control *sc)

lruvec = mem_cgroup_zone_lruvec(zone, memcg);

+ sc->swappiness = mem_cgroup_swappiness(memcg);
shrink_lruvec(lruvec, sc);

/*
@@ -2678,6 +2675,7 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *memcg,
.may_swap = !noswap,
.order = 0,
.priority = 0,
+ .swappiness = mem_cgroup_swappiness(memcg),
.target_mem_cgroup = memcg,
};
struct lruvec *lruvec = mem_cgroup_zone_lruvec(zone, memcg);
--
1.9.2
--
Michal Hocko
SUSE Labs


\
 
 \ /
  Last update: 2014-04-26 17:41    [W:0.058 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site