lkml.org 
[lkml]   [2014]   [Apr]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator device node
Date
Hi Nicolas,

> -----Original Message-----
> From: Ferre, Nicolas
> Sent: Saturday, April 19, 2014 5:26 AM
> To: Yang, Wenyou
> Cc: broonie@kernel.org; lgirdwood@gmail.com; grant.likely@linaro.org;
> rob.herring@calxeda.com; plagnioj@jcrosoft.com; linux-
> kernel@vger.kernel.org; devicetree@vger.kernel.org; linux-
> doc@vger.kernel.org; linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH v5 3/3] ARM: dts: sama5d3xcm: add the regulator
> device node
>
> On 24/12/2013 03:36, Wenyou Yang :
> > Reviwed-by: Mark Brown <broonie@linaro.org>
> > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
>
> Wenyou,
>
> While collecting patches for our next at91-3.16-dt branch I noticed
> this patch that should go on top of the SAMA5D3 CMP board.
>
> I would prefer to create another .dtsi file for CMP board and not mix
> with the current cpu module usual board that does not contain this
> regulator. But well we can do something even more simpler and move this
> PMIC example to the newer SAMA5D3 Xplained board.
>
> So, will it be possible for you to re-send a new patch targeted to
> SAMA5D3 Xplained?
OK, I will re-send a new patch.

>
> Thanks, bye.
>
>
> > ---
> > arch/arm/boot/dts/sama5d3xcm.dtsi | 46
> +++++++++++++++++++++++++++++++++++++
> > 1 file changed, 46 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi
> > b/arch/arm/boot/dts/sama5d3xcm.dtsi
> > index 726a0f3..3d4e5c2 100644
> > --- a/arch/arm/boot/dts/sama5d3xcm.dtsi
> > +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
> > @@ -38,6 +38,52 @@
> > macb0: ethernet@f0028000 {
> > phy-mode = "rgmii";
> > };
> > +
> > + i2c1: i2c@f0018000 {
> > + pmic: act8865@5b {
> > + compatible = "active-semi,act8865";
> > + reg = <0x5b>;
> > + status = "disabled";
> > +
> > + regulators {
> > + vcc_1v8_reg: DCDC_REG1 {
> > + regulator-name = "VCC_1V8";
> > + regulator-min-microvolt =
> <1800000>;
> > + regulator-max-microvolt =
> <1800000>;
> > + regulator-always-on;
> > + };
> > +
> > + vcc_1v2_reg: DCDC_REG2 {
> > + regulator-name = "VCC_1V2";
> > + regulator-min-microvolt =
> <1100000>;
> > + regulator-max-microvolt =
> <1300000>;
> > + regulator-suspend-mem-
> microvolt = <1150000>;
> > + regulator-suspend-standby-
> microvolt = <1150000>;
> > + regulator-always-on;
> > + };
> > +
> > + vcc_3v3_reg: DCDC_REG3 {
> > + regulator-name = "VCC_3V3";
> > + regulator-min-microvolt =
> <3300000>;
> > + regulator-max-microvolt =
> <3300000>;
> > + regulator-always-on;
> > + };
> > +
> > + vddana_reg: LDO_REG1 {
> > + regulator-name = "VDDANA";
> > + regulator-min-microvolt =
> <3300000>;
> > + regulator-max-microvolt =
> <3300000>;
> > + regulator-always-on;
> > + };
> > +
> > + vddfuse_reg: LDO_REG2 {
> > + regulator-name = "FUSE_2V5";
> > + regulator-min-microvolt =
> <2500000>;
> > + regulator-max-microvolt =
> <2500000>;
> > + };
> > + };
> > + };
> > + };
> > };
> >
> > nand0: nand@60000000 {
> >
>
>
> --
> Nicolas Ferre

Best Regards,
Wenyou Yang


\
 
 \ /
  Last update: 2014-04-21 05:41    [W:0.055 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site