lkml.org 
[lkml]   [2014]   [Apr]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Missing USB XHCI and EHCI reset for kexec

Zitat von Benjamin Herrenschmidt <benh@au1.ibm.com>:

> On Sun, 2014-04-13 at 21:22 +0200, Stefani Seibold wrote:
>> When executing a kexec kernel on a PowerPC board the new started kernel
>> will not find already enumerated USB devices due a missing reset on the
>> USB bus.
>>
>> As a work around a
>>
>> echo 1 >/sys/bus/pci/drivers/[ex]hci-pci/BUS-ADDRESS-OF-THE-HCD/reset
>>
>> will solve this. But this is far from beauty.
>>
>> My latest kernel without this issue was for EHCI kernel 2.6.39 and for
>> XHCI kernel 3.4, but i have no idea when exactly this behavior was
>> introduced.
>>
>> For X86 all is fine.
>
> I don't know about EHCI specifically but this is a known issue with
> XHCI, I observe similar issues on other powerpc platforms (servers)
> and this isn't architecture specific (looks more like actualy xhc
> implementation specific).
>
> Thadeu Cascardo (on CC) has been the one investigating that on our side,
> he might have more to add including patches.
>

I have now a kernel 3.14 dmesg log of the problem. After a kexec the
kexeced 3.14 kernel shows:

[ 1.170029] xhci_hcd 0001:03:00.0: xHCI Host Controller
[ 1.175306] xhci_hcd 0001:03:00.0: new USB bus registered, assigned
bus number 1
[ 1.212561] xhci_hcd 0001:03:00.0: Host not halted after 16000
microseconds.
[ 1.219621] xhci_hcd 0001:03:00.0: can't setup: -110
[ 1.224597] xhci_hcd 0001:03:00.0: USB bus 1 deregistered
[ 1.230021] xhci_hcd 0001:03:00.0: init 0001:03:00.0 fail, -110
[ 1.235955] xhci_hcd: probe of 0001:03:00.0 failed with error -110

Any idea?

- Stefani




\
 
 \ /
  Last update: 2014-04-14 18:21    [W:0.101 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site