lkml.org 
[lkml]   [2014]   [Apr]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 1/2] dts: socfpga: Add bindings for Altera SoC SDRAM controller
From
Date
On Tue, 2014-04-01 at 07:28 +0200, Steffen Trumtrar wrote:
> Hi!
>
> On Mon, Mar 31, 2014 at 05:07:06PM -0500, tthayer@altera.com wrote:
> > From: Thor Thayer <tthayer@altera.com>
> >
> > Addition of the Altera SDRAM controller bindings and device
> > tree changes to the Altera SoC project.
> >

<snip>

> > diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> > new file mode 100644
> > index 0000000..351ab7b
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> > @@ -0,0 +1,14 @@
> > +Altera SOCFPGA SDRAM Controller
> > +
> > +Required properties:
> > +- compatible : "altr,sdr-ctl", "syscon";
> > + Note that syscon is invoked for this device to support the FPGA
> > + bridge driver and possibly other devices in the future. See
> > + also Documentation/devicetree/bindings/mfd/syscon.txt
>
> This note is really linux specific (and specific to some vendor kernel driver
> for that matter). I think you should remove that.

Hi Steffen. Are you asking for the path to syscon.txt to be removed or
the entire note?
The note is explaining why the "syscon" tag is used for this Altera IP
block (registers shared between multiple drivers).
Thanks for the clarification.

>
> > +- reg : Should contain 1 register ranges(address and length)
> > +
> > +Example:
> > + sdrctl@0xffc25000 {
> > + compatible = "altr,sdr-ctl", "syscon";
> > + reg = <0xffc25000 0x1000>;
> > + };
> > diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> > index 9e78c1d..3634de7 100644
> > --- a/arch/arm/boot/dts/socfpga.dtsi
> > +++ b/arch/arm/boot/dts/socfpga.dtsi
> > @@ -528,6 +528,11 @@
> > reg-io-width = <4>;
> > };
> >
> > + sdrctl@0xffc25000 {
> > + compatible = "altr,sdr-ctl", "syscon";
> > + reg = <0xffc25000 0x1000>;
> > + };
> > +
> > rstmgr@ffd05000 {
> > compatible = "altr,rst-mgr";
> > reg = <0xffd05000 0x1000>;
>
> Regards,
> Steffen
>



\
 
 \ /
  Last update: 2014-04-01 23:01    [W:2.102 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site