lkml.org 
[lkml]   [2014]   [Mar]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 4/8] ARM: dts: omap5: Add clocks to USB3 PHY node
Date
The USB3 PHY driver now expects named clocks. Add the
relevant clocks to the USB3 PHY node.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 859a800..88bd327 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -779,6 +779,12 @@
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy>;
+ clocks = <&usb_phy_cm_clk32k>,
+ <&sys_clkin>,
+ <&usb_otg_ss_refclk960m>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
#phy-cells = <0>;
};
};
--
1.8.3.2


\
 
 \ /
  Last update: 2014-03-07 14:01    [W:0.100 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site