lkml.org 
[lkml]   [2014]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Testing 1 hard disk in 3 different usb enclosures: kernel reports 3 different "numbers of sectors"
Jaime T wrote:
> I'd like to use my 1TB Seagate hard disk on my linux box, and I've
> tested it using 3 different usb-sata enclosures.
>
> kernel: [10612.017588] usb 1-1: New USB device found, idVendor=14cd, idProduct=6116
> kernel: [10612.017602] usb 1-1: Product: USB Mass Storage Device
> kernel: [10612.017607] usb 1-1: Manufacturer: Generic
> kernel: [10730.225053] usb 1-1: New USB device found, idVendor=152d, idProduct=2509
> kernel: [10730.225067] usb 1-1: Product: Usb production
> kernel: [10730.225072] usb 1-1: Manufacturer: JMicron
> kernel: [10837.309203] usb 1-2: New USB device found, idVendor=152d, idProduct=2339
> kernel: [10837.309218] usb 1-2: Product: USB to ATA/ATAPI Bridge
> kernel: [10837.309223] usb 1-2: Manufacturer: JMicron
>
> kernel: [10613.019646] sd 25:0:0:0: [sdb] 1953525166 512-byte logical blocks: (1.00 TB/931 GiB)
> kernel: [10731.227818] sd 26:0:0:0: [sdb] 1953524995 512-byte logical blocks: (1.00 TB/931 GiB)
> kernel: [10838.311867] sd 27:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
>
> So Linux (v3.10.25) is reporting 3 different sizes/numbers of sectors
> for the same single hard disk.

The kernel just reports what the device reports.

> Could this be a problem with regards to possible future data
> corruption, or is it something that I can safely ignore?

It is likely that you will not be able to access the sectors beyond
the reported limit. It might be possible that the enclosure does not
ignore those sectors but uses them to store its own management data.


Regards,
Clemens


\
 
 \ /
  Last update: 2014-03-21 10:21    [W:0.084 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site