lkml.org 
[lkml]   [2014]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/16] avr32: merisc: use generic leds_pwm driver
Date
Switch to the generic leds_pwm driver instead of leds-atmel-pwm.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
arch/avr32/boards/merisc/setup.c | 34 +++++++++++++++++++++-------------
1 file changed, 21 insertions(+), 13 deletions(-)

diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index ed137e335796..b0980c1946a7 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -22,6 +22,8 @@
#include <linux/irq.h>
#include <linux/fb.h>
#include <linux/atmel-mci.h>
+#include <linux/pwm.h>
+#include <linux/leds_pwm.h>

#include <asm/io.h>
#include <asm/setup.h>
@@ -167,24 +169,29 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
};

-#ifdef CONFIG_LEDS_ATMEL_PWM
-static struct gpio_led stk_pwm_led[] = {
+#if IS_ENABLED(CONFIG_LEDS_PWM)
+static struct pwm_lookup pwm_lookup[] = {
+ PWM_LOOKUP("at91sam9rl-pwm", 0, "leds_pwm", "backlight"),
+};
+
+static struct led_pwm pwm_leds[] = {
{
.name = "backlight",
- .gpio = 0, /* PWM channel 0 (LCD backlight) */
+ .max_brightness = 255,
+ .pwm_period_ns = 5000,
},
};

-static struct gpio_led_platform_data stk_pwm_led_data = {
- .num_leds = ARRAY_SIZE(stk_pwm_led),
- .leds = stk_pwm_led,
+static struct led_pwm_platform_data pwm_data = {
+ .num_leds = ARRAY_SIZE(pwm_leds),
+ .leds = pwm_leds,
};

-static struct platform_device stk_pwm_led_dev = {
- .name = "leds-atmel-pwm",
- .id = -1,
- .dev = {
- .platform_data = &stk_pwm_led_data,
+static struct platform_device leds_pwm = {
+ .name = "leds_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &pwm_data,
},
};
#endif
@@ -278,9 +285,10 @@ static int __init merisc_init(void)

at32_add_device_mci(0, &mci0_data);

-#ifdef CONFIG_LEDS_ATMEL_PWM
+#if IS_ENABLED(CONFIG_LEDS_PWM)
+ pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
at32_add_device_pwm((1 << 0) | (1 << 2));
- platform_device_register(&stk_pwm_led_dev);
+ platform_device_register(&leds_pwm);
#else
at32_add_device_pwm((1 << 2));
#endif
--
1.8.3.2


\
 
 \ /
  Last update: 2014-03-19 17:01    [W:0.251 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site