lkml.org 
[lkml]   [2014]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5] can: xilinx CAN controller support.
On 03/10/2014 04:15 PM, Rob Herring wrote:
> On Tue, Mar 4, 2014 at 7:20 AM, Kedareswara rao Appana
> <appana.durga.rao@xilinx.com> wrote:
>> This patch adds xilinx CAN controller support.
>> This driver supports both ZYNQ CANPS and Soft IP
>> AXI CAN controller.
>>
>> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
>> ---
>> This patch is rebased on the 3.14 rc5 kernel.
>> Changes for v5:
>> - Updated the driver with the review comments.
>> - Remove the check for the tx fifo full interrupt condition
>> form Tx interrupt routine as we are checking it in the _xmit
>> routine.
>> - Clearing the txok interrupt in the tx interrupt routine for
>> every Tx can frame.
>> Changes for v4:
>> - Added check for the tx fifo full interrupt condition in
>> Tx interrupt routine.
>> - Added be iohelper functions.
>> - Moved the clock enable/disable to probe/remove because of
>> Added big endian support for AXI CAN controller case(reading
>> a register during probe for that we need to enable clock).
>> Changes for v3:
>> - Updated the driver with the review comments.
>> - Modified the tranmit logic as per Marc suggestion.
>> - Enabling the clock when the interface is up to reduce the
>> Power consumption.
>> Changes for v2:
>> - Updated with the review comments.
>> - Removed the unnecessary debug prints.
>> - include tx,rx fifo depths in ZYNQ CANPS case also.
>> ---
>> .../devicetree/bindings/net/can/xilinx_can.txt | 45 +
>> drivers/net/can/Kconfig | 7 +
>> drivers/net/can/Makefile | 1 +
>> drivers/net/can/xilinx_can.c | 1195 ++++++++++++++++++++
>> 4 files changed, 1248 insertions(+), 0 deletions(-)
>> create mode 100644 Documentation/devicetree/bindings/net/can/xilinx_can.txt
>> create mode 100644 drivers/net/can/xilinx_can.c
>>
>> diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
>> new file mode 100644
>> index 0000000..0e57103
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt
>> @@ -0,0 +1,45 @@
>> +Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings
>> +---------------------------------------------------------
>> +
>> +Required properties:
>> +- compatible : Should be "xlnx,zynq-can-1.00.a" for Zynq CAN
>> + controllers and "xlnx,axi-can-1.00.a" for Axi CAN
>> + controllers.
>> +- reg : Physical base address and size of the Axi CAN/Zynq
>> + CANPS registers map.
>> +- interrupts : Property with a value describing the interrupt
>> + number.
>> +- interrupt-parent : Must be core interrupt controller
>> +- clock-names : List of input clock names - "ref_clk", "aper_clk"
>> + (See clock bindings for details. Two clocks are
>> + required for Zynq CAN. For Axi CAN
>> + case it is one(ref_clk)).
>> +- clocks : Clock phandles (see clock bindings for details).
>> +- tx-fifo-depth : Can Tx fifo depth.
>> +- rx-fifo-depth : Can Rx fifo depth.
>> +
>> +
>> +Example:
>> +
>> +For Zynq CANPS Dts file:
>> + zynq_can_0: zynq-can@e0008000 {
>
> The preferred node name convention is to use the type of device. There
> is no standard in this case, but I would use just "can@...".
>
> Otherwise, for the binding:
>
> Acked-by: Rob Herring <robh@kernel.org>

Thanks Rob for your ACK.

Kedar: You have got more things to change from Marc that's why please change this too.

Thanks,
Michal




\
 
 \ /
  Last update: 2014-03-10 17:01    [W:1.430 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site