lkml.org 
[lkml]   [2014]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH V2] Change ACPI IPMI support to "default y"
Date
On Fri, 2014-02-21 at 02:17 +0000, Zheng, Lv wrote:

> In fact there is a workaround solution I've posted here:
> https://patchwork.kernel.org/patch/2831851/
> The updated version of this patch can be found at:
> https://bugzilla.kernel.org/attachment.cgi?id=112611
> It is the acpi-ipmi13.patch file.

I don't think that solves the underlying problem? We're still left with
no guarantee of ordering between ACPI IPMI operation region support
being available and the loading of a driver that may rely on it.

> I think there should be relationship between ACPI region and Linux kernel modules.
> In fact on the well-known operating system, _REG is always invoked at the end of the IRP_PNP_START_DEVICE completions.
> But we may still be able to return -EPROBE_DEFER in the power meter driver when it detects failures caused by the readiness state of the region handlers.

We don't have a guarantee that it'll happen at probe time. The
capabilities list may be static, and so we'll get our first failure on
an attempted userspace access instead.

It may be that Corey's suggestion satisfies the concerns Russ raised.
Building IPMI in but only probing by default on systems that declare a
BMC in ACPI or DMI should avoid boot-time delays while still ensuring
that the functionality is available on systems where there's a real
chance that the firmware expects the OS to provide support.

--
Matthew Garrett <matthew.garrett@nebula.com>
\
 
 \ /
  Last update: 2014-02-21 18:01    [W:0.924 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site