lkml.org 
[lkml]   [2014]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3.12 063/107] media: anysee: fix non-working E30 Combo Plus DVB-T
Date
3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antti Palosaari <crope@iki.fi>

commit c57f87e62368c33ebda11a4993380c8e5a19a5c5 upstream.

PLL was attached twice to frontend0 leaving frontend1 without a tuner.
frontend0 is DVB-C and frontend1 is DVB-T.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/media/usb/dvb-usb-v2/anysee.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/media/usb/dvb-usb-v2/anysee.c
+++ b/drivers/media/usb/dvb-usb-v2/anysee.c
@@ -442,6 +442,7 @@ static struct cxd2820r_config anysee_cxd
* IOD[0] ZL10353 1=enabled
* IOE[0] tuner 0=enabled
* tuner is behind ZL10353 I2C-gate
+ * tuner is behind TDA10023 I2C-gate
*
* E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
* PCB: 508TC (rev0.6)
@@ -956,7 +957,7 @@ static int anysee_tuner_attach(struct dv

if (fe && adap->fe[1]) {
/* attach tuner for 2nd FE */
- fe = dvb_attach(dvb_pll_attach, adap->fe[0],
+ fe = dvb_attach(dvb_pll_attach, adap->fe[1],
(0xc0 >> 1), &d->i2c_adap,
DVB_PLL_SAMSUNG_DTOS403IH102A);
}



\
 
 \ /
  Last update: 2014-02-11 21:41    [W:0.428 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site