lkml.org 
[lkml]   [2014]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/14] mfd/regulator/rtc: sec: Add support for S2MPS14
Date
Hi,


This patchset adds support for S2MPS14 device to the Samsung MFD driver family.

The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two
clocks instead of three and a little different registers layout.

The patchset is organized in following way:
1. Patches from 1 to 7 clean up the S2MPS1X/S5M876X drivers and prepare
for adding S2MPS14 support (some symbol renaming is needed).
2. Patches from 8 to 10 add support for S2MPS14 to the MFD and regulator
drivers. They depend on previous patches.
3. Patches 11 and 12 add opmode support for S2MPS14 regulator driver.
4. Patches 13 and 14 add support for S2MPS14 RTC and they depend on previous
MFD and RTC patches.

Probably the best way to get everything working and merged into the linux-next
would be to obtain ACK-s from all maintainers and to put all the patches into
the mfd-next tree.


The patchset is based on linux-next: next-20140211 *with* today's patch:
mfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy error


TODO
====
Add support for S2MPS14 to the S2MPS11 clock driver. The patch
is actually ready but it is based on the "Add support for clocks in S5M8767"
http://thread.gmane.org/gmane.linux.kernel/1587881/focus=1587882
which didn't get their way into clk-next. I will wait for them.


Krzysztof Kozlowski (14):
mfd: sec: Add maximum RTC register for regmap config
mfd: sec: Select different RTC regmaps for devices
mfd/rtc: sec/sec: Rename SEC* symbols to S5M
rtc: s5m: Remove undocumented time init on first boot
mfd: sec: Use consistent S2MPS11 RTC alarm interrupt indexes
regulator: s2mps11: Constify regulator_desc array
regulator: s2mps11: Choose number of supported regulators during
probe
mfd: sec: Add support for S2MPS14
regulator: s2mps11: Add support for S2MPS14 regulators
Documentation: mfd: s2mps11: Document support for S2MPS14
regulator: s2mps11: Add opmode for S2MPS14 regulators
Documentation: mfd/regulator: s2mps11: Document the "op_mode"
bindings
rtc: s5m: Support different register layout
rtc: s5m: Add support for S2MPS14 RTC

Documentation/devicetree/bindings/mfd/s2mps11.txt | 58 ++-
drivers/mfd/sec-core.c | 57 ++-
drivers/mfd/sec-irq.c | 97 ++++-
drivers/regulator/s2mps11.c | 393 +++++++++++++++++----
drivers/rtc/rtc-s5m.c | 284 ++++++++++-----
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/irq.h | 31 +-
include/linux/mfd/samsung/rtc.h | 132 ++++---
include/linux/mfd/samsung/s2mps14.h | 169 +++++++++
9 files changed, 1000 insertions(+), 222 deletions(-)
create mode 100644 include/linux/mfd/samsung/s2mps14.h

--
1.7.9.5



\
 
 \ /
  Last update: 2014-02-11 14:41    [W:0.137 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site