lkml.org 
[lkml]   [2014]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 0/5] Add gpio support to Broadcom Cygnus SoC
    Date
    This patchset contains the initial GPIO support for the Broadcom Cygnus SoC.
    Cygnus has 3 GPIO controllers: 1) the ASIU GPIO; 2) the chipCommonG GPIO;
    and 3) the ALWAYS-ON GPIO. All 3 types of GPIO controllers are supported by
    the same Cygnus GPIO driver

    Changes from v1:
    - Get rid of inline qualifier
    - Get rid of redundant check in the ISR
    - Other minor fixes to imrove code readability

    Ray Jui (5):
    gpio: Cygnus: define Broadcom Cygnus GPIO binding
    gpio: Cygnus: add GPIO driver
    ARM: mach-bcm: Enable GPIO support for Cygnus
    ARM: dts: enable GPIO for Broadcom Cygnus
    MAINTAINERS: Entry for Cygnus GPIO driver

    .../devicetree/bindings/gpio/brcm,cygnus-gpio.txt | 85 +++
    MAINTAINERS | 7 +
    arch/arm/boot/dts/bcm-cygnus.dtsi | 30 +
    arch/arm/mach-bcm/Kconfig | 1 +
    drivers/gpio/Kconfig | 11 +
    drivers/gpio/Makefile | 1 +
    drivers/gpio/gpio-bcm-cygnus.c | 712 ++++++++++++++++++++
    7 files changed, 847 insertions(+)
    create mode 100644 Documentation/devicetree/bindings/gpio/brcm,cygnus-gpio.txt
    create mode 100644 drivers/gpio/gpio-bcm-cygnus.c

    --
    1.7.9.5



    \
     
     \ /
      Last update: 2014-12-08 04:01    [W:4.626 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site