lkml.org 
[lkml]   [2014]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 0/6] support GMAC driver for RK3288
Date
Hi David,

Am Mittwoch, 31. Dezember 2014, 19:15:38 schrieb David Miller:
> From: Roger Chen <roger.chen@rock-chips.com>
> Date: Mon, 29 Dec 2014 17:42:32 +0800
>
> > Roger Chen (6):
> > patch1: add driver for Rockchip RK3288 SoCs integrated GMAC
> > patch2: define clock ID used for GMAC
> > patch3: modify CRU config for Rockchip RK3288 SoCs integrated GMAC
> > patch4: dts: rockchip: add gmac info for rk3288
> > patch5: dts: rockchip: enable gmac on RK3288 evb board
> > patch6: add document for Rockchip RK3288 GMAC
> >
> > Tested on rk3288 evb board:
> > Execute the following command to enable ethernet,
> > set local IP and ping a remote host.
> >
> > busybox ifconfig eth0 up
> > busybox ifconfig eth0 192.168.1.111
> > ping 192.168.1.1
>
> Series applied to net-next, thanks.

could we split this up a bit instead?

If everything goes through your tree, we'll end up with a lot of conflicts with
other pending stuff, so I'd really appreciate if you could leave out patches

patch2: define clock ID used for GMAC
patch3: modify CRU config for Rockchip RK3288 SoCs integrated GMAC
patch4: dts: rockchip: add gmac info for rk3288
patch5: dts: rockchip: enable gmac on RK3288 evb board

so only take the driver itself and the dt-binding and I would take these 4
above through the appropriate trees (clk and arm-soc)


Thanks and happy new year
Heiko


\
 
 \ /
  Last update: 2015-01-01 03:21    [W:0.096 / U:0.432 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site