Messages in this thread Patch in this message | | | From | Jonathan Richardson <> | Subject | [PATCH v4 3/3] pwm: core: Set enable state properly on failed call to enable | Date | Tue, 30 Dec 2014 14:43:30 -0800 |
| |
The pwm_enable function didn't clear the enabled bit if a call to a clients enable function returned an error. The result was that the state of the pwm core was wrong. Clearing the bit when enable returns an error ensures the state is properly set.
Signed-off-by: Jonathan Richardson <jonathar@broadcom.com> --- drivers/pwm/core.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 966497d..641f6ec 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -457,8 +457,14 @@ EXPORT_SYMBOL_GPL(pwm_set_polarity); */ int pwm_enable(struct pwm_device *pwm) { - if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags)) - return pwm->chip->ops->enable(pwm->chip, pwm); + int err; + + if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags)) { + err = pwm->chip->ops->enable(pwm->chip, pwm); + if (err) + clear_bit(PWMF_ENABLED, &pwm->flags); + return err; + } return pwm ? 0 : -EINVAL; } -- 1.7.9.5
| |