lkml.org 
[lkml]   [2014]   [Dec]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] PCI: update dma configuration from DT
Date
If there is a DT node available for the root bridge's parent device,
use the dma configuration from that device node. For example, keystone
PCI devices would require dma_pfn_offset to be set correctly in the
device structure of the pci device in order to have the correct dma mask.
The DT node will have dma-ranges defined for this. Also support using
the DT property dma-coherent to allow coherent DMA operation by the
PCI device.

This patch use the new helper function of_pci_dma_configure() to update
the device dma configuration.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
---
drivers/pci/probe.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 23212f8..d7dcd6c 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -6,6 +6,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/of_pci.h>
#include <linux/pci_hotplug.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -1520,6 +1521,7 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
dev->dev.dma_mask = &dev->dma_mask;
dev->dev.dma_parms = &dev->dma_parms;
dev->dev.coherent_dma_mask = 0xffffffffull;
+ of_pci_dma_configure(dev);

pci_set_dma_max_seg_size(dev, 65536);
pci_set_dma_seg_boundary(dev, 0xffffffff);
--
1.7.9.5


\
 
 \ /
  Last update: 2014-12-24 23:41    [W:0.082 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site