lkml.org 
[lkml]   [2014]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Disabled LocalPlus Controller (LPC) clock on MPC512x
On 16/12/2014 13:00, Alexander Popov wrote:
> 02.12.2014 13:47, Matteo Facchinetti пишет:
>> On 26/11/2014 12:49, Alexander Popov wrote:
>>> So starting Linux with clk_ignore_unused bootparam
>>> or inserting dummy LPB reading to some initcall is a temporary fix.
>
> In fact clk_ignore_unused bootparam helps to avoid disabling NFC clock.
> The board crash is reproduced again if I perform the following steps:
> 1. disable NFC clock in uboot by clearing NFC_EN bit in SCCR1 register,
> 2. boot Linux with clk_ignore_unused,
> 3. touch any LPB address.
>

Could you see the Reset Status Register (RSR) after board crash?
When boad reset, you may stop uboot in console and then print the value
of this register.

This could be help to see what happen internally to the microcontroller.



\
 
 \ /
  Last update: 2014-12-19 11:21    [W:0.076 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site