lkml.org 
[lkml]   [2014]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv3 4/5] edac: altera: Add Altera L2 Cache and OCRAM EDAC Support
On Thu, Oct 30, 2014 at 10:32:10AM -0500, tthayer@opensource.altera.com wrote:
> From: Thor Thayer <tthayer@opensource.altera.com>
>
> Adding L2 Cache and On-Chip RAM EDAC support for the
> Altera SoCs using the EDAC device model. The SDRAM
> controller is using the Memory Controller model. All
> Altera EDAC functions live in altera_edac.c.
>
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---
> v2: Fix L2 dependency comments.
>
> v3: Move OCRAM and L2 cache EDAC functions into altera_edac.c
> instead of separate files.
> ---
> drivers/edac/Kconfig | 14 ++
> drivers/edac/Makefile | 5 +-
> drivers/edac/altera_edac.c | 475 +++++++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 492 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 1719975..b145a52 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -385,4 +385,18 @@ config EDAC_ALTERA_MC
> preloader must initialize the SDRAM before loading
> the kernel.
>
> +config EDAC_ALTERA_L2C
> + bool "Altera L2 Cache EDAC"
> + depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA && CACHE_L2X0
> + help
> + Support for error detection and correction on the
> + Altera L2 cache Memory for Altera SoCs.
> +
> +config EDAC_ALTERA_OCRAM
> + bool "Altera On-Chip RAM EDAC"
> + depends on EDAC_MM_EDAC=y && ARCH_SOCFPGA && SRAM && GENERIC_ALLOCATOR
> + help
> + Support for error detection and correction on the
> + Altera On-Chip RAM Memory for Altera SoCs.

Why are those separate config items? Why not switch on EDAC_ALTERA_MC
and get it all?

We can always split them out later, if needed but I don't think
we should burden the user with unnecessary questions if it is not
absolutely necessary.

> +
> endif # EDAC
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index 359aa49..fa8aebc 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -66,4 +66,7 @@ obj-$(CONFIG_EDAC_OCTEON_L2C) += octeon_edac-l2c.o
> obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o
> obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o
>
> -obj-$(CONFIG_EDAC_ALTERA_MC) += altera_edac.o
> +alt_edac-y := altera_edac.o
> +obj-$(CONFIG_EDAC_ALTERA_MC) += alt_edac.o
> +obj-$(CONFIG_EDAC_ALTERA_L2C) += alt_edac.o
> +obj-$(CONFIG_EDAC_ALTERA_OCRAM) += alt_edac.o
> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
> index 3c4929f..1ee8d94 100644
> --- a/drivers/edac/altera_edac.c
> +++ b/drivers/edac/altera_edac.c
> @@ -17,8 +17,10 @@
> * Adapted from the highbank_mc_edac driver.
> */
>
> +#include <asm/cacheflush.h>
> #include <linux/ctype.h>
> #include <linux/edac.h>
> +#include <linux/genalloc.h>
> #include <linux/interrupt.h>
> #include <linux/kernel.h>
> #include <linux/mfd/syscon.h>
> @@ -33,6 +35,7 @@
>
> #define EDAC_MOD_STR "altera_edac"
> #define EDAC_VERSION "1"
> +#define EDAC_DEVICE "DEVICE"

That name is not very descriptive.

> /* SDRAM Controller CtrlCfg Register */
> #define CTLCFG_OFST 0x00
> @@ -107,6 +110,30 @@ struct altr_sdram_mc_data {
> struct regmap *mc_vbase;
> };
>
> +/************************** EDAC Device Defines **************************/
> +
> +/* OCRAM ECC Management Group Defines */
> +#define ALTR_MAN_GRP_OCRAM_ECC_OFFSET 0x04
> +#define ALTR_OCR_ECC_EN_MASK 0x00000001
> +#define ALTR_OCR_ECC_INJS_MASK 0x00000002
> +#define ALTR_OCR_ECC_INJD_MASK 0x00000004
> +#define ALTR_OCR_ECC_SERR_MASK 0x00000008
> +#define ALTR_OCR_ECC_DERR_MASK 0x00000010
> +
> +/* MPU L2 Register Defines */
> +#define ALTR_MPUL2_CONTROL_OFFSET 0x100
> +#define ALTR_MPUL2_CTL_CACHE_EN_MASK 0x00000001
> +
> +/* L2 ECC Management Group Defines */
> +#define ALTR_MAN_GRP_L2_ECC_OFFSET 0x00
> +#define ALTR_L2_ECC_EN_MASK 0x00000001
> +#define ALTR_L2_ECC_INJS_MASK 0x00000002
> +#define ALTR_L2_ECC_INJD_MASK 0x00000004

You can use BIT() for those.

> +
> +/*********************** EDAC Memory Controller Functions ****************/
> +
> +/* The SDRAM controller uses the EDAC Memory Controller framework. */
> +
> static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
> {
> struct mem_ctl_info *mci = dev_id;
> @@ -405,6 +432,452 @@ static struct platform_driver altr_sdram_edac_driver = {
>
> module_platform_driver(altr_sdram_edac_driver);
>
> +/************************* EDAC Device Functions *************************/
> +
> +/*
> + * EDAC Device Functions (shared between various IPs).
> + * The discrete memories use the EDAC Device framework. The probe
> + * and error handling functions are very similar between memories
> + * so they are shared. The memory allocation and free for EDAC trigger
> + * testing are different for each memory.
> + */
> +
> +const struct edac_device_prv_data ocramecc_data;
> +const struct edac_device_prv_data l2ecc_data;
> +
> +struct edac_device_prv_data {
> + int (*setup)(struct platform_device *pdev, void __iomem *base);
> + int ce_clear_mask;
> + int ue_clear_mask;
> +#ifdef CONFIG_EDAC_DEBUG
> + struct edac_dev_sysfs_attribute *eccmgr_sysfs_attr;
> + void * (*alloc_mem)(size_t size, void **other);
> + void (*free_mem)(void *p, size_t size, void *other);
> + int ecc_enable_mask;
> + int ce_set_mask;
> + int ue_set_mask;
> + int trig_alloc_sz;
> +#endif
> +};
> +
> +struct altr_edac_device_dev {
> + void __iomem *base;
> + int sb_irq;
> + int db_irq;
> + const struct edac_device_prv_data *data;
> + char *edac_dev_name;
> +};
> +
> +static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
> +{
> + struct edac_device_ctl_info *dci = dev_id;
> + struct altr_edac_device_dev *drvdata = dci->pvt_info;
> + const struct edac_device_prv_data *priv = drvdata->data;
> +
> + if (irq == drvdata->sb_irq) {
> + if (priv->ce_clear_mask)
> + writel(priv->ce_clear_mask, drvdata->base);
> + edac_device_handle_ce(dci, 0, 0, drvdata->edac_dev_name);
> + }
> + if (irq == drvdata->db_irq) {
> + if (priv->ue_clear_mask)
> + writel(priv->ue_clear_mask, drvdata->base);
> + edac_device_handle_ue(dci, 0, 0, drvdata->edac_dev_name);
> + panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_EDAC_DEBUG
> +ssize_t altr_edac_device_trig(struct edac_device_ctl_info *edac_dci,
> + const char *buffer, size_t count)
> +{
> + u32 *ptemp, i, error_mask;
> + int result = 0;
> + unsigned long flags;
> + struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
> + const struct edac_device_prv_data *priv = drvdata->data;
> + void *generic_ptr = edac_dci->dev;
> +
> + if (!priv->alloc_mem)
> + return -ENOMEM;
> +
> + /* Note that generic_ptr is initialized to the device * but in
> + * some init_functions, this is overridden and returns data */

Kernel comment style:

/*
* Blabla.
* More Bla.
*/

> + ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr);
> + if (!ptemp) {
> + edac_printk(KERN_ERR, EDAC_DEVICE,
> + "Inject: Buffer Allocation error\n");
> + return -ENOMEM;
> + }
> +
> + if (count == 3)

Magic number 3.

/me needs crystal ball :)

> + error_mask = priv->ue_set_mask;
> + else
> + error_mask = priv->ce_set_mask;
> +
> + edac_printk(KERN_ALERT, EDAC_DEVICE,
> + "Trigger Error Mask (0x%X)\n", error_mask);
> +
> + local_irq_save(flags);
> + /* write ECC corrupted data out. */
> + for (i = 0; i < (priv->trig_alloc_sz/sizeof(*ptemp)); i++) {
> + /* Read data so we're in the correct state */
> + rmb();
> + if (ACCESS_ONCE(ptemp[i]))
> + result = -1;
> + /* Toggle Error bit (it is latched), leave ECC enabled */
> + writel(error_mask, drvdata->base);
> + writel(priv->ecc_enable_mask, drvdata->base);
> + ptemp[i] = i;
> + }
> + /* Ensure it has been written out */
> + wmb();
> + local_irq_restore(flags);

Doesn't the interrupt reenabling on ARM already cause outstanding writes
to commit so that you don't really need the memory barrier?

> +
> + if (result)
> + edac_printk(KERN_ERR, EDAC_DEVICE, "Mem Not Cleared\n");
> +
> + /* Read out written data. ECC error caused here */
> + for (i = 0; i < 16; i++)

Magic number 16. Where's my ball again?! :)

> + if (ACCESS_ONCE(ptemp[i]) != i)
> + edac_printk(KERN_ERR, EDAC_DEVICE,
> + "Mem Doesn't match\n");

I guess injectors should know what this printk means? I can assume
it says something about inject data written doesn't match what we're
reading?

> +
> + if (priv->free_mem)
> + priv->free_mem(ptemp, priv->trig_alloc_sz, generic_ptr);
> +
> + return count;
> +}
> +
> +static void altr_set_sysfs_attr(struct edac_device_ctl_info *edac_dci,
> + const struct edac_device_prv_data *priv)
> +{
> + struct edac_dev_sysfs_attribute *ecc_attr = priv->eccmgr_sysfs_attr;
> +
> + if (ecc_attr) {
> + edac_dci->sysfs_attributes = ecc_attr;
> + edac_printk(KERN_ERR, EDAC_DEVICE, "Set SysFS trigger\n");

Why do we have to say this here? Debugging leftovers maybe?

> + }
> +}
> +#else
> +static void altr_set_sysfs_attr(struct edac_device_ctl_info *edac_dci,
> + const struct edac_device_prv_data *priv)
> +{}
> +#endif /* #ifdef CONFIG_EDAC_DEBUG */
> +
> +static const struct of_device_id altr_edac_device_of_match[] = {
> +#ifdef CONFIG_EDAC_ALTERA_L2C
> + { .compatible = "altr,l2-edac", .data = (void *)&l2ecc_data },
> +#endif
> +#ifdef CONFIG_EDAC_ALTERA_OCRAM
> + { .compatible = "altr,ocram-edac", .data = (void *)&ocramecc_data },
> +#endif

If you enable l2c and ocram by default, you can save yourself the ugly
ifdeffery here too.

> + {},
> +};
> +MODULE_DEVICE_TABLE(of, altr_edac_device_of_match);
> +
> +/*
> + * altr_edac_device_probe()
> + * This is a generic EDAC device driver that will support
> + * various Altera memory devices such as the L2 cache ECC and
> + * OCRAM ECC as well as the memories for other peripherals.
> + * Module specific initialization is done by passing the
> + * function index in the device tree.
> + */
> +static int altr_edac_device_probe(struct platform_device *pdev)
> +{
> + struct edac_device_ctl_info *dci;
> + struct altr_edac_device_dev *drvdata;
> + struct resource *r;
> + int res = 0;
> + struct device_node *np = pdev->dev.of_node;
> + char *ecc_name = (char *)np->name;
> + static int dev_instance;
> +
> + if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL))
> + return -ENOMEM;
> +
> + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!r) {
> + edac_printk(KERN_ERR, EDAC_DEVICE,
> + "Unable to get mem resource\n");
> + return -ENODEV;
> + }
> +
> + if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
> + dev_name(&pdev->dev))) {
> + edac_printk(KERN_ERR, EDAC_DEVICE,
> + "%s:Error requesting mem region\n", ecc_name);
> + return -EBUSY;
> + }
> +
> + dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
> + 1, ecc_name, 1, 0, NULL, 0,
> + dev_instance++);
> +
> + if (!dci)
> + return -ENOMEM;
> +
> + drvdata = dci->pvt_info;
> + dci->dev = &pdev->dev;
> + platform_set_drvdata(pdev, dci);
> + drvdata->edac_dev_name = ecc_name;
> +
> + drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
> + if (!drvdata->base) {
> + edac_printk(KERN_ERR, EDAC_DEVICE,
> + "%s:Unable to map regs\n", ecc_name);
> + return -ENOMEM;

This should be goto err, no? To unwind what edac_device_alloc_ctl_info()
allocated.

> + }
> +
> + /* Get driver specific data for this EDAC device */
> + drvdata->data = of_match_node(altr_edac_device_of_match, np)->data;
> +
> + /* Check specific dependencies for the module */
> + if (drvdata->data->setup) {
> + res = drvdata->data->setup(pdev, drvdata->base);
> + if (res < 0)
> + goto err;
> + }
> +
> + drvdata->sb_irq = platform_get_irq(pdev, 0);
> + res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
> + altr_edac_device_handler,
> + 0, dev_name(&pdev->dev), dci);
> + if (res < 0)
> + goto err;
> +
> + drvdata->db_irq = platform_get_irq(pdev, 1);
> + res = devm_request_irq(&pdev->dev, drvdata->db_irq,
> + altr_edac_device_handler,
> + 0, dev_name(&pdev->dev), dci);
> + if (res < 0)
> + goto err;
> +
> + dci->mod_name = "EDAC_DEVICE";

Maybe more descriptive name with "ALTERA" in it?

> + dci->dev_name = drvdata->edac_dev_name;
> +
> + altr_set_sysfs_attr(dci, drvdata->data);
> +
> + if (edac_device_add_device(dci))
> + goto err;
> +
> + devres_close_group(&pdev->dev, NULL);
> +
> + return 0;
> +err:
> + devres_release_group(&pdev->dev, NULL);
> + edac_device_free_ctl_info(dci);
> +
> + return res;
> +}
> +
> +static int altr_edac_device_remove(struct platform_device *pdev)
> +{
> + struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
> +
> + edac_device_del_device(&pdev->dev);
> + edac_device_free_ctl_info(dci);
> +
> + return 0;
> +}
> +
> +static struct platform_driver altr_edac_device_driver = {
> + .probe = altr_edac_device_probe,
> + .remove = altr_edac_device_remove,
> + .driver = {
> + .name = "altr_edac_device",
> + .of_match_table = altr_edac_device_of_match,
> + },
> +};
> +module_platform_driver(altr_edac_device_driver);
> +
> +/*********************** OCRAM EDAC Device Functions *********************/
> +
> +#ifdef CONFIG_EDAC_ALTERA_OCRAM
> +
> +#ifdef CONFIG_EDAC_DEBUG
> +static void *ocram_alloc_mem(size_t size, void **other)
> +{
> + struct device_node *np;
> + struct gen_pool *gp;
> + void *sram_addr;
> +
> + np = of_find_compatible_node(NULL, NULL, "altr,ocram-edac");
> + if (!np)
> + return NULL;
> +
> + gp = of_get_named_gen_pool(np, "iram", 0);
> + if (!gp)
> + return NULL;
> + *other = gp;

There's this assignment here to the supplied pointer...

> +
> + sram_addr = (void *)gen_pool_alloc(gp, size);
> + if (!sram_addr)
> + return NULL;

... and when we fail here, caller still gets to play with it. Perhaps do
the assignment after all calls here have succeeded first...?

> +
> + memset(sram_addr, 0, size);
> + wmb(); /* Ensure data is written out */
> +
> + return sram_addr;
> +}
> +
> +static void ocram_free_mem(void *p, size_t size, void *other)
> +{
> + gen_pool_free((struct gen_pool *)other, (u32)p, size);
> +}
> +
> +static struct edac_dev_sysfs_attribute altr_ocr_sysfs_attributes[] = {
> + {
> + .attr = { .name = "altr_ocram_trigger",
> + .mode = (S_IRUGO | S_IWUSR) },
> + .show = NULL,
> + .store = altr_edac_device_trig
> + },
> + {
> + .attr = {.name = NULL }
> + }
> +};
> +#endif /* #ifdef CONFIG_EDAC_DEBUG */
> +
> +/*
> + * altr_ocram_dependencies()
> + * Test for OCRAM cache ECC dependencies upon entry because
> + * platform specific startup should have initialized the
> + * On-Chip RAM memory and enabled the ECC.
> + * Can't turn on ECC here because accessing un-initialized
> + * memory will cause CE/UE errors possibly causing an ABORT.
> + */
> +static int altr_ocram_dependencies(struct platform_device *pdev,
> + void __iomem *base)
> +{
> + u32 control;
> +
> + control = readl(base) & ALTR_OCR_ECC_EN_MASK;
> + if (!control) {
> + dev_err(&pdev->dev,
> + "OCRAM: No ECC present or ECC disabled.\n");
> + return -ENODEV;
> + }

Flip logic to save an indentation level:

if (control)
return 0;

dev_err...
return -ENODEV;

> +
> + return 0;
> +}
> +
> +const struct edac_device_prv_data ocramecc_data = {
> + .setup = altr_ocram_dependencies,
> + .ce_clear_mask = (ALTR_OCR_ECC_EN_MASK | ALTR_OCR_ECC_SERR_MASK),
> + .ue_clear_mask = (ALTR_OCR_ECC_EN_MASK | ALTR_OCR_ECC_DERR_MASK),
> +#ifdef CONFIG_EDAC_DEBUG
> + .eccmgr_sysfs_attr = altr_ocr_sysfs_attributes,
> + .alloc_mem = ocram_alloc_mem,
> + .free_mem = ocram_free_mem,
> + .ecc_enable_mask = ALTR_OCR_ECC_EN_MASK,
> + .ce_set_mask = (ALTR_OCR_ECC_EN_MASK | ALTR_OCR_ECC_INJS_MASK),
> + .ue_set_mask = (ALTR_OCR_ECC_EN_MASK | ALTR_OCR_ECC_INJD_MASK),
> + .trig_alloc_sz = (32 * sizeof(u32)),
> +#endif
> +};
> +
> +#endif /* #ifdef CONFIG_EDAC_ALTERA_OCRAM */
> +
> +/********************* L2 Cache EDAC Device Functions ********************/
> +
> +#ifdef CONFIG_EDAC_ALTERA_L2C
> +
> +#ifdef CONFIG_EDAC_DEBUG
> +static void *l2_alloc_mem(size_t size, void **other)
> +{
> + struct device *dev = *other;
> + void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL);
> +
> + if (!ptemp)
> + return NULL;
> +
> + /* Make sure everything is written out */
> + wmb();
> + flush_cache_all();
> +
> + return ptemp;
> +}
> +
> +static void l2_free_mem(void *p, size_t size, void *other)
> +{
> + struct device *dev = other;
> +
> + if (dev && p)
> + devm_kfree(dev, p);
> +}
> +
> +static struct edac_dev_sysfs_attribute altr_l2_sysfs_attributes[] = {
> + {
> + .attr = { .name = "altr_l2_trigger",
> + .mode = (S_IRUGO | S_IWUSR) },
> + .show = NULL,
> + .store = altr_edac_device_trig
> + },
> + {
> + .attr = {.name = NULL }
> + }
> +};
> +#endif /* #ifdef CONFIG_EDAC_DEBUG */
> +
> +/*
> + * altr_l2_dependencies()
> + * Test for L2 cache ECC dependencies upon entry because
> + * platform specific startup should have initialized the L2
> + * memory and enabled the ECC.
> + * Can't turn on ECC here because accessing un-initialized
> + * memory will cause CE/UE errors possibly causing an ABORT.
> + * Bail if ECC is not on.
> + * Test For 1) L2 ECC is enabled and 2) L2 Cache is enabled.
> + */
> +static int altr_l2_dependencies(struct platform_device *pdev,
> + void __iomem *base)
> +{
> + u32 control;
> + struct regmap *l2_vbase;
> +
> + control = readl(base) & ALTR_L2_ECC_EN_MASK;
> + if (!control) {
> + dev_err(&pdev->dev, "L2: No ECC present, or ECC disabled\n");
> + return -ENODEV;
> + }
> +
> + l2_vbase = syscon_regmap_lookup_by_compatible("arm,pl310-cache");
> + if (IS_ERR(l2_vbase)) {
> + dev_err(&pdev->dev,
> + "L2 ECC:regmap for arm,pl310-cache lookup failed.\n");
> + return -ENODEV;
> + }
> +
> + regmap_read(l2_vbase, ALTR_MPUL2_CONTROL_OFFSET, &control);
> + if (!(control & ALTR_MPUL2_CTL_CACHE_EN_MASK)) {
> + dev_err(&pdev->dev, "L2: Cache disabled\n");
> + return -ENODEV;
> + }
> +
> + return 0;
> +}
> +
> +const struct edac_device_prv_data l2ecc_data = {
> + .setup = altr_l2_dependencies,
> + .ce_clear_mask = 0,
> + .ue_clear_mask = 0,
> +#ifdef CONFIG_EDAC_DEBUG
> + .eccmgr_sysfs_attr = altr_l2_sysfs_attributes,
> + .alloc_mem = l2_alloc_mem,
> + .free_mem = l2_free_mem,
> + .ecc_enable_mask = ALTR_L2_ECC_EN_MASK,
> + .ce_set_mask = (ALTR_L2_ECC_EN_MASK | ALTR_L2_ECC_INJS_MASK),
> + .ue_set_mask = (ALTR_L2_ECC_EN_MASK | ALTR_L2_ECC_INJD_MASK),
> + .trig_alloc_sz = 4 * 1024,
> +#endif
> +};
> +
> +#endif /* #ifdef CONFIG_EDAC_ALTERA_L2C */
> +
> MODULE_LICENSE("GPL v2");
> MODULE_AUTHOR("Thor Thayer");
> -MODULE_DESCRIPTION("EDAC Driver for Altera SDRAM Controller");
> +MODULE_DESCRIPTION("EDAC Driver for Altera Memories");
> --
> 1.7.9.5
>
>

--
Regards/Gruss,
Boris.

Sent from a fat crate under my desk. Formatting is fine.
--


\
 
 \ /
  Last update: 2014-11-04 16:21    [W:0.088 / U:0.680 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site