lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 1/3] devicetree: of: Add bindings for chosen node, stdout-path
On Thu, Nov 27, 2014 at 05:56:05PM +0000, Leif Lindholm wrote:
> Add a global binding for the chosen node.
> Include a description of the stdout-path, and an explicit statement on
> its extra options in the context of a UART console.
>
> Opening description stolen from www.devicetree.org, and part of the
> remaining text provided by Mark Rutland.
>
> Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
> ---
> Documentation/devicetree/bindings/chosen.txt | 42 ++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/chosen.txt
>
> diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
> new file mode 100644
> index 0000000..9cd74e9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/chosen.txt
> @@ -0,0 +1,42 @@
> +The chosen node
> +---------------
> +
> +The chosen node does not represent a real device, but serves as a place
> +for passing data between firmware and the operating system, like boot
> +arguments. Data in the chosen node does not represent the hardware.
> +
> +
> +stdout-path property
> +--------------------
> +
> +Device trees may specify the device to be used for boot console output
> +with a stdout-path property under /chosen, as described in ePAPR, e.g.
> +
> +/ {
> + chosen {
> + stdout-path = "/serial@f00:115200";
> + };
> +
> + serial@f00 {
> + compatible = "vendor,some-uart";
> + reg = <0xf00 0x10>;
> + };
> +};
> +
> +If the character ":" is present in the value, this terminates the path.
> +The meaning of any characters following the ":" is device-specific, and
> +must be specified in the relevant binding documentation.
> +
> +For UART devices, the format supported by uart_parse_options() is the
> +expected one. In this case, the format of the string is:
Please drop the mention of uart_parse_options and just describe the
format. Linux internal details are irrelevant to the contract of the
binding.

Otherwise this looks good to me!

Thanks,
Mark.

> +
> + <baud>{<parity>{<bits>{<flow>}}}
> +
> +where
> +
> + baud - baud rate in decimal
> + parity - 'n' (none), 'o', (odd) or 'e' (even)
> + bits - number of data bits
> + flow - 'r' (rts)
> +
> +For example: 115200n8r
> --
> 1.7.10.4
>
>


\
 
 \ /
  Last update: 2014-11-27 20:21    [W:0.204 / U:0.944 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site