lkml.org 
[lkml]   [2014]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH V2 00/22] Multiplatform BMIPS kernel
    Date
    This patch series implements a multiplatform target that runs on a
    variety of different Broadcom chipsets based on the BMIPS CPUs. It
    evolved out of the "BMIPS updates and BCM3384 platform support"
    RFC posted earlier.

    V1->V2:

    - Add several more DTS files so the same kernel can boot on multiple
    chips: BCM6328, BCM6368, BCM7125, BCM7346, BCM7360, BCM7420, BCM7425,
    and as a very special bonus, the BCM3384 Viper CPU.

    - Add irq-bcm7038-l1.c to support the BCM7xxx chipsets.

    - Rename target from "bcm3384" to "bmips".

    - Change L1_CACHE_SHIFT fix so it works correctly when multiple BMIPS
    CPU types are selected.

    - Drop dependency on rejected EARLYCON_FORCE changes.

    - Delete most of my new irq.c, in favor of using the refactored
    irq-bcm7120-l2.c.

    - Add flush for BMIPS3300/BMIPS43xx readahead caches, to avoid
    non-coherency after DMA_FROM_DEVICE operations.

    - Utilize the new MIPS IRQ APIs from mips-for-linux-next.

    - Tweak docs/copyrights/maintainership.


    This series is based on 3.18-rc4, plus:

    http://patchwork.linux-mips.org/bundle/cernekee/bmips-multi-v2-deps/?state=*
    http://marc.info/?l=linux-usb&m=141305106215886&w=2 (all 3/3)

    These are all queued for tty-next / irqchip-next / usb-next. Notably,
    the proposed serial/pxa/ttyBCM coexistence changes are not required at
    this time.


    A couple of sample boot logs are posted here:

    https://gist.github.com/cernekee/e53a6ff05292c3a78a94


    checkpatch status:

    The checkpatch warnings fall into two categories:

    - Undocumented DT bindings. These SoCs use mostly-standard-looking
    peripherals (OHCI/EHCI controllers, ethernet PHYs), but it may be
    necessary to add extra code in the future to compensate for
    hardware quirks. So the compatible string in the DTS file lists
    both the generic device name (documented) and a more specific
    identifier for the hardware present on the chip (undocumented).

    - extern declarations for the __dtb_* symbols.


    Known issues:

    If the lockdep checks are enabled, I see a weird IRQ state mismatch
    returning from e.g. sys_execve(). CP0 STATUS shows IE disabled, but
    current->hardirqs_enabled == 1. Not sure if this is a problem with
    my new code or something more general. It only shows up on
    SMP && !PREEMPT builds.

    Booting a HIGHMEM MIPS kernel on a system with cache aliases may fail
    if the system has >256MB of memory. AFAICT this is a general problem
    with the fallback logic in arch/mips/mm/init.c.

    Many of the BCM63xx bootloaders impose severe restrictions on the kernel
    size. This tends to cause a lot of trouble booting images that include
    an initramfs (because we're still missing MTD support). One workaround
    is to set CONFIG_PHYSICAL_START to a higher value, like 0x8100_0000.


    Future work:

    Many BCM7xxx boards can be freely switched between big endian and little
    endian modes, with the latter being the default. It would be nice if we
    could use identical DTS files for both configurations, since the LE/BE
    setting mostly doesn't affect how the peripherals work. But currently a
    few assumptions are hardcoded in there ("big-endian" USB register
    properties and a hack to get the 16550 register addresses correct). I
    submitted a patch to the DT/serial lists which adds a "native-endian"
    property; if this is accepted and utilized by the drivers in question, it
    will go a long way toward solving this problem.

    Lots of peripherals are still missing, especially flash and bcm63xx_enet.
    The lack of a reboot handler is annoying; syscon-reboot probably won't work
    on STB (because it requires two writes). Some peripherals, like USB on
    certain boards, need more work (possibly PHY drivers) and were left
    disabled.

    There are ways to retrieve other information from the legacy non-DT
    bootloaders, but they're pretty hacky. The flash configuration is among
    the worst of the bunch, because these chips can have up to 4 different
    flash controllers, more than one can be active at a time, and the
    bootloader just passes "hints" rather than explicit partition maps. For
    specific boards it is sometimes OK to hardcode the map into the DTS file,
    although most of the supported boards are user-reconfigurable and the
    flash layouts may change from one bootloader version to the next.

    There is currently no way to distinguish between different bcm63xx
    board types (i.e. we can only identify the SoC, not the board). There
    is a way to distinguish different bcm7xxx board types, although in
    practice the data source is somewhat unreliable and doesn't always convey
    all of the information needed to distinguish boards with different
    capabilities.

    The kernel makes a few assumptions about how the bootloader has set up
    Broadcom-specific registers for e.g. USB. If/when power management
    features are added, these registers will revert to their default settings
    on resume, and somehow need to be set up again by Linux.

    irq-bcm7120-l2.c is getting a little bloated and I'm not entirely happy
    with the latest round of changes. In particular it would be really nice
    if the probe function could use the devm_ APIs and not have to worry
    about so many error paths. And I'm not sure if the generic-chip helpers
    are making the code any simpler.


    Dmitry Torokhov (2):
    irqchip: brcmstb-l2: fix error handling of irq_of_parse_and_map
    irqchip: bcm7120-l2: fix error handling of irq_of_parse_and_map

    Jon Fraser (2):
    MIPS: BMIPS: Allow BMIPS3300 to utilize SMP ebase relocation code
    MIPS: BMIPS: Mask off timer IRQs when hot-unplugging a CPU

    Kevin Cernekee (18):
    irqchip: Update docs regarding irq_domain_add_tree()
    irqchip: bcm7120-l2: Refactor driver for arbitrary IRQEN/IRQSTAT
    offsets
    irqchip: bcm7120-l2: Change DT binding to allow non-contiguous
    IRQEN/IRQSTAT
    irqchip: Add new driver for BCM7038-style level 1 interrupt
    controllers
    MIPS: BMIPS: Fix ".previous without corresponding .section" warnings
    MIPS: BMIPS: Align secondary boot sequence with latest firmware
    releases
    MIPS: BMIPS: Introduce helper function to change the reset vector
    MIPS: BMIPS: Explicitly configure reset vectors prior to secondary
    boot
    MIPS: Allow MIPS_CPU_SCACHE to be used with different line sizes
    MIPS: BMIPS: Fix L1_CACHE_SHIFT when BMIPS5000 is selected
    MIPS: BMIPS: Let each platform customize the CPU1 IRQ mask
    MIPS: BMIPS: Add special cache handling in c-r4k.c
    MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)
    MIPS: Create a helper function for DT setup
    Documentation: DT: Add "mti" vendor prefix
    MAINTAINERS: Add entry for bcm63xx/bcm33xx UDC gadget driver
    MAINTAINERS: Add entry for BMIPS multiplatform kernel
    MIPS: Add multiplatform BMIPS target

    Documentation/IRQ-domain.txt | 3 +-
    .../interrupt-controller/brcm,bcm7038-l1-intc.txt | 52 ++++
    .../interrupt-controller/brcm,bcm7120-l2-intc.txt | 5 +-
    .../devicetree/bindings/mips/brcm/bmips.txt | 8 +
    .../devicetree/bindings/mips/brcm/soc.txt | 21 ++
    .../devicetree/bindings/vendor-prefixes.txt | 1 +
    MAINTAINERS | 18 ++
    arch/mips/Kbuild.platforms | 1 +
    arch/mips/Kconfig | 40 ++-
    arch/mips/bmips/Makefile | 1 +
    arch/mips/bmips/Platform | 7 +
    arch/mips/bmips/dma.c | 109 +++++++
    arch/mips/bmips/irq.c | 38 +++
    arch/mips/bmips/setup.c | 249 +++++++++++++++
    arch/mips/boot/dts/Makefile | 9 +
    arch/mips/boot/dts/bcm3384_common.dtsi | 44 +++
    arch/mips/boot/dts/bcm3384_viper.dtsi | 63 ++++
    arch/mips/boot/dts/bcm3384_zephyr.dtsi | 82 +++++
    arch/mips/boot/dts/bcm6328.dtsi | 63 ++++
    arch/mips/boot/dts/bcm6368.dtsi | 89 ++++++
    arch/mips/boot/dts/bcm7125.dtsi | 99 ++++++
    arch/mips/boot/dts/bcm7346.dtsi | 174 +++++++++++
    arch/mips/boot/dts/bcm7360.dtsi | 121 ++++++++
    arch/mips/boot/dts/bcm7420.dtsi | 142 +++++++++
    arch/mips/boot/dts/bcm7425.dtsi | 174 +++++++++++
    arch/mips/boot/dts/bcm93384wvg.dts | 25 ++
    arch/mips/boot/dts/bcm93384wvg_viper.dts | 25 ++
    arch/mips/boot/dts/bcm96368mvwg.dts | 31 ++
    arch/mips/boot/dts/bcm97125cbmb.dts | 31 ++
    arch/mips/boot/dts/bcm97346dbsmb.dts | 58 ++++
    arch/mips/boot/dts/bcm97360svmb.dts | 34 +++
    arch/mips/boot/dts/bcm97420c.dts | 44 +++
    arch/mips/boot/dts/bcm97425svmb.dts | 59 ++++
    arch/mips/boot/dts/bcm9ejtagprb.dts | 22 ++
    arch/mips/configs/bmips_be_defconfig | 83 +++++
    arch/mips/configs/bmips_stb_defconfig | 83 +++++
    arch/mips/include/asm/bmips.h | 1 +
    arch/mips/include/asm/cpu.h | 1 +
    arch/mips/include/asm/mach-bmips/dma-coherence.h | 45 +++
    arch/mips/include/asm/mach-bmips/spaces.h | 17 ++
    arch/mips/include/asm/mach-bmips/war.h | 24 ++
    arch/mips/include/asm/prom.h | 1 +
    arch/mips/kernel/bmips_vec.S | 3 -
    arch/mips/kernel/cpu-probe.c | 1 +
    arch/mips/kernel/prom.c | 18 ++
    arch/mips/kernel/smp-bmips.c | 114 ++++---
    arch/mips/lantiq/prom.c | 11 +-
    arch/mips/mm/c-r4k.c | 43 +++
    arch/mips/ralink/of.c | 14 +-
    drivers/irqchip/Kconfig | 5 +
    drivers/irqchip/Makefile | 1 +
    drivers/irqchip/irq-bcm7038-l1.c | 335 +++++++++++++++++++++
    drivers/irqchip/irq-bcm7120-l2.c | 105 +++++--
    drivers/irqchip/irq-brcmstb-l2.c | 4 +-
    54 files changed, 2755 insertions(+), 96 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
    create mode 100644 Documentation/devicetree/bindings/mips/brcm/bmips.txt
    create mode 100644 Documentation/devicetree/bindings/mips/brcm/soc.txt
    create mode 100644 arch/mips/bmips/Makefile
    create mode 100644 arch/mips/bmips/Platform
    create mode 100644 arch/mips/bmips/dma.c
    create mode 100644 arch/mips/bmips/irq.c
    create mode 100644 arch/mips/bmips/setup.c
    create mode 100644 arch/mips/boot/dts/bcm3384_common.dtsi
    create mode 100644 arch/mips/boot/dts/bcm3384_viper.dtsi
    create mode 100644 arch/mips/boot/dts/bcm3384_zephyr.dtsi
    create mode 100644 arch/mips/boot/dts/bcm6328.dtsi
    create mode 100644 arch/mips/boot/dts/bcm6368.dtsi
    create mode 100644 arch/mips/boot/dts/bcm7125.dtsi
    create mode 100644 arch/mips/boot/dts/bcm7346.dtsi
    create mode 100644 arch/mips/boot/dts/bcm7360.dtsi
    create mode 100644 arch/mips/boot/dts/bcm7420.dtsi
    create mode 100644 arch/mips/boot/dts/bcm7425.dtsi
    create mode 100644 arch/mips/boot/dts/bcm93384wvg.dts
    create mode 100644 arch/mips/boot/dts/bcm93384wvg_viper.dts
    create mode 100644 arch/mips/boot/dts/bcm96368mvwg.dts
    create mode 100644 arch/mips/boot/dts/bcm97125cbmb.dts
    create mode 100644 arch/mips/boot/dts/bcm97346dbsmb.dts
    create mode 100644 arch/mips/boot/dts/bcm97360svmb.dts
    create mode 100644 arch/mips/boot/dts/bcm97420c.dts
    create mode 100644 arch/mips/boot/dts/bcm97425svmb.dts
    create mode 100644 arch/mips/boot/dts/bcm9ejtagprb.dts
    create mode 100644 arch/mips/configs/bmips_be_defconfig
    create mode 100644 arch/mips/configs/bmips_stb_defconfig
    create mode 100644 arch/mips/include/asm/mach-bmips/dma-coherence.h
    create mode 100644 arch/mips/include/asm/mach-bmips/spaces.h
    create mode 100644 arch/mips/include/asm/mach-bmips/war.h
    create mode 100644 drivers/irqchip/irq-bcm7038-l1.c

    --
    2.1.1



    \
     
     \ /
      Last update: 2014-11-16 01:41    [W:4.383 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site