lkml.org 
[lkml]   [2014]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 5/6] Documentation: dt-bindings: Add binding info for X-Gene QMTM UIO driver
Hi Mark,

On 21 October 2014 14:44, Mark Rutland <mark.rutland@arm.com> wrote:
> On Tue, Oct 21, 2014 at 06:56:49AM +0100, Ankit Jindal wrote:
>> This patch adds device tree binding documentation for
>> X-Gene QMTM UIO driver.
>>
>> Signed-off-by: Ankit Jindal <ankit.jindal@linaro.org>
>> Signed-off-by: Tushar Jagad <tushar.jagad@linaro.org>
>> ---
>> .../devicetree/bindings/uio/uio_xgene_qmtm.txt | 53 ++++++++++++++++++++
>> 1 file changed, 53 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt
>>
>> diff --git a/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt b/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt
>> new file mode 100644
>> index 0000000..288ed92
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/uio/uio_xgene_qmtm.txt
>> @@ -0,0 +1,53 @@
>> +APM X-Gene QMTM UIO nodes
>
> The "UIO" can go.
Sure.

>
>> +The Applied Micro X-Gene SOC has on-chip QMTM (Queue manager
>> +and Traffic manager). It is a device for managing hardware queues.
>> +It also implements QoS among hardware queues hence term "traffic"
>> +manager is present in its name. QMTM UIO nodes are defined for user
>> +space access to this device using UIO framework.
>
> The binding should describe the hardware, not the software. Please drop
> mention of UIO, userspace, etc.
Sure.

>
>> +Required properties:
>> +- compatible: Should be "apm,xgene-qmtm"
>> +- reg: Address and length of the register set for the device. It contains the
>> + information of registers in the same order as described by reg-names.
>> +- reg-names: Should contain the register set names
>> + - "csr": QMTM control and status register address space.
>> + - "fabric": QMTM memory mapped access to queue states.
>> +- qpool: Points to the phandle of the node defining memory location for
>> + creating QMTM queues. This could point either to the reserved-memory
>> + node (as-per reserved memory bindings) or to the node of on-chip
>> + SRAM etc. It is expected that size and location of qpool memory will
>> + be configurable via bootloader.
>
> Is that on-chip SRAM part of the QMTM, or is that a shared part of the
> SoC?
Its not part of QMTM.

>
> It feels odd to have a phandle that can go to completely different
> classes of node, especially as you will need to use a different API to
> acquire the memory region within Linux.
It is expected that phandle will point to a node whose first reg
property will be only for qpool memory.

>
>> +- clocks: Reference to the clock entry.
>
> Just the one clock? Does the clock input to the QMTM have a name?
Just one input clock. There is no specific name of it.

>
>> +- num-queues: Number of queues under this QMTM device.
>> +- devid: QMTM identification number for the system having multiple QMTM devices.
>> + This is used to form a unique id (a tuple of queue number and
>> + device id) for the queues belonging to this device.
>
> Is this just an arbitrary unique ID, or is this a non-probeable property
> of the HW? If the former, isn't the base address sufficient as a unique
> identifier?
Its a non-probeable property of the HW.

Thanks,
Ankit
>
> Thanks,
> Mark.
>
>> +Example:
>> + qmtm1_uio_qpool: qmtm1_uio_qpool {
>> + reg = <0x0 0x0 0x0 0x0>
>> + };
>> +
>> + qmtm1clk: qmtmclk@1f20c000 {
>> + compatible = "apm,xgene-device-clock";
>> + clock-output-names = "qmtm1clk";
>> + status = "ok";
>> + };
>> +
>> + qmtm1_uio: qmtm_uio@1f200000 {
>> + compatible = "apm,xgene-qmtm";
>> + status = "disabled";
>> + reg = <0x0 0x1f200000 0x0 0x10000>,
>> + <0x0 0x1b000000 0x0 0x400000>;
>> + reg-names = "csr", "fabric";
>> + qpool = <&qmtm1_uio_qpool>;
>> + clocks = <&qmtm1clk 0>;
>> + num-queues = <0x400>;
>> + devid = <1>;
>> + };
>> +
>> + /* Board-specific peripheral configurations */
>> + &qmtm1_uio {
>> + status = "ok";
>> + };
>> --
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>


\
 
 \ /
  Last update: 2014-10-31 11:41    [W:0.129 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site