lkml.org 
[lkml]   [2014]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm/panel: s6e8aa0: Update calls to gpiod_get*()
On 10/23/2014 10:16 AM, Alexandre Courbot wrote:
> Add the new flags argument to calls of (devm_)gpiod_get*() and
> remove any direction setting code afterwards.
>
> Currently both forms (with or without the flags argument)
> are valid thanks to transitional macros in
> <linux/gpio/consumer.h>. These macros will be removed once
> all consumers are updated and the flags argument will become
> compulsary.
>
> Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>

It needs patch "gpio: Fix gpio direction flags not getting set" to work
correctly. It is not yet present in drm-next. Beside this:

Acked-by: Andrzej Hajda <a.hajda@samsung.com>

--
Regards
Andrzej


> ---
> drivers/gpu/drm/panel/panel-s6e8aa0.c | 7 +------
> 1 file changed, 1 insertion(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-s6e8aa0.c b/drivers/gpu/drm/panel/panel-s6e8aa0.c
> index b5217fe37f02..6427aa187735 100644
> --- a/drivers/gpu/drm/panel/panel-s6e8aa0.c
> +++ b/drivers/gpu/drm/panel/panel-s6e8aa0.c
> @@ -1019,17 +1019,12 @@ static int s6e8aa0_probe(struct mipi_dsi_device *dsi)
> return ret;
> }
>
> - ctx->reset_gpio = devm_gpiod_get(dev, "reset");
> + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(ctx->reset_gpio)) {
> dev_err(dev, "cannot get reset-gpios %ld\n",
> PTR_ERR(ctx->reset_gpio));
> return PTR_ERR(ctx->reset_gpio);
> }
> - ret = gpiod_direction_output(ctx->reset_gpio, 1);
> - if (ret < 0) {
> - dev_err(dev, "cannot configure reset-gpios %d\n", ret);
> - return ret;
> - }
>
> ctx->brightness = GAMMA_LEVEL_NUM - 1;
>
>



\
 
 \ /
  Last update: 2014-10-23 12:21    [W:0.064 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site