lkml.org 
[lkml]   [2014]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v4 0/5] USB Host support for OMAP5 uEVM (for 3.14)
    On 09/01/2014 12:08, Roger Quadros wrote:
    > Hi Michele,
    >
    > Did you enable CONFIG_USB_EHCI_HCD_OMAP in the kernel config?
    > It is not enabled by default in omap2plus_defconfig.
    Indeed it works. Thank you!

    >
    > cheers,
    > -roger
    >
    > On 01/09/2014 04:34 PM, Michele Paolino wrote:
    >> Hello Roger,
    >>
    >> I'm testing your patch on an OMAP5430 EVM board. The ethernet is not working in my case. The kernel I'm using is (Tero Kristo's repo - branch 3.13-rc7-dt-clks-v13). Is there something that I'm missing?
    >>
    >> Here below you can find more info about my configuration:
    >>
    >> boot error messages:
    >> eth0: ERROR while getting interface flags: No such device
    >> SIOCSIFADDR: No such device
    >> eth0: ERROR while getting interface flags: No such device
    >> SIOCADDRT: Network is unreachable
    >>
    >> root@OMAP5:~# /usr/lib/klibc/bin/ipconfig eth0
    >> ipconfig: eth0: SIOCGIFINDEX: No such device
    >> /usr/lib/klibc/bin/ipconfig: no devices to configure
    >>
    >> root@OMAP5:~# uname -a
    >> Linux OMAP5 3.13.0-rc7-g2a4526d-dirty #0 SMP Wed Jan 8 10:41:48 CET 2014x
    >>
    >> root@OMAP5:~# dmesg | grep eth
    >> [ 1.661434] usbcore: registered new interface driver cdc_ether
    >>
    >> Regards,
    >>
    >>
    >> On 08/01/2014 07:15, Roger Quadros wrote:
    >>> Hi Benoit & Tony,
    >>>
    >>> This patchset brings up USB Host ports and Ethernet port on
    >>> the OMAP5 uEVM board.
    >>>
    >>> It depends on the TI Clock DT conversion patches [1] and is based
    >>> on 3.13-rc7
    >>>
    >>> [1] - http://article.gmane.org/gmane.linux.ports.arm.kernel/289895
    >>>
    >>> Changelog:
    >>>
    >>> v4:
    >>> - Updated DT binding document for clock binding
    >>>
    >>> v3:
    >>> - Rebased on top of 3.13-rc7
    >>>
    >>> cheers,
    >>> -roger
    >>>
    >>> Roger Quadros (5):
    >>> mfd: omap-usb-host: Update DT clock binding information
    >>> ARM: dts: OMAP5: Add 60MHz clock reference to USB Host module
    >>> ARM: dts: omap4-panda: Provide USB PHY clock
    >>> ARM: dts: omap5-uevm: Provide USB PHY clock
    >>> ARM: OMAP2+: Remove legacy_init_ehci_clk()
    >>>
    >>> Documentation/devicetree/bindings/mfd/omap-usb-host.txt | 4 ++++
    >>> arch/arm/boot/dts/omap4-panda-common.dtsi | 8 ++------
    >>> arch/arm/boot/dts/omap5-uevm.dts | 8 ++------
    >>> arch/arm/boot/dts/omap5.dtsi | 2 ++
    >>> arch/arm/mach-omap2/pdata-quirks.c | 16 ----------------
    >>> 5 files changed, 10 insertions(+), 28 deletions(-)
    >>>
    >>
    >> --
    >> *Michele Paolino*, Virtualization R&D Engineer
    >> Virtual Open Systems
    >> /Open Source KVM Virtualization Developments/
    >> /Multicore Systems Virtualization Porting Services/
    >> Web/:/ www.virtualopensystems. <http://www.virtualopensystems.com/>com <http://www.virtualopensystems.com/>
    >>
    >>
    --
    Michele Paolino, Virtualization R&D Engineer
    Virtual Open Systems


    \
     
     \ /
      Last update: 2014-01-09 13:41    [W:2.870 / U:0.152 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site