lkml.org 
[lkml]   [2014]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [PATCH 2/2] ARM: dts: OMAP3+: add clock nodes for CPU
From
On Wed, Jan 29, 2014 at 12:19 PM, Nishanth Menon <nm@ti.com> wrote:
> OMAP34xx, AM3517 and OMAP36xx platforms use dpll1 clock.
>
> OMAP443x, OMAP446x, OMAP447x, OMAP5, DRA7, AM43xx platforms use
> dpll_mpu clock.
>
> Latency used is the generic latency defined in omap-cpufreq
> driver.
>
> Signed-off-by: Nishanth Menon <nm@ti.com>

Hi Nishanth,

After this patch, do you see any limitation to finally enabling 1Ghz
operation on the beagle-xm by default? Or are we still missing a
dependicy somewhere?

cpufreq stats: 300 MHz:98.64%, 600 MHz:0.04%, 800 MHz:0.09%, 1000
MHz:1.23% (11)
full cpufreq output: http://paste.debian.net/79073/

diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts
b/arch/arm/boot/dts/omap3-beagle-xm.dts
index bb5dad0..b0e5863 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -16,9 +16,36 @@
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
+ operating-points = <
+ /* kHz uV */
+ 300000 1012500
+ 600000 1200000
+ 800000 1325000
+ 1000000 1380000
+ >;
};
};

+ abb: regulator-abb {
+ compatible = "ti,abb-v1";
+ regulator-name = "abb";
+ #address-cell = <0>;
+ #size-cells = <0>;
+ reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+ reg-names = "base-address", "int-address";
+ ti,tranxdone-status-mask = <0x4000000>;
+ clocks = <&dpll1_ck>;
+ ti,settling-time = <30>;
+ ti,clock-cycles = <8>;
+ ti,abb_info = <
+ /* uV ABB efuse rbb_m fbb_m
vset_m */
+ 1012500 0 0 0 0
0 /* Bypass */
+ 1200000 3 0 0 0
0 /* RBB mandatory */
+ 1320000 1 0 0 0
0 /* FBB mandatory */
+ 1380000 1 0 0 0 0
+ >;
+ };
+
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
--
1.8.5.3
Regards,

--
Robert Nelson
http://www.rcn-ee.com/


\
 
 \ /
  Last update: 2014-01-29 21:21    [W:0.076 / U:1.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site