lkml.org 
[lkml]   [2014]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 03/14] of: mtd: add documentation for nand-ecc-level property
Date
nand-ecc-level property statically defines NAND chip's ECC requirements.

Signed-off-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
---
Documentation/devicetree/bindings/mtd/nand.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
index 03855c8..0c962296 100644
--- a/Documentation/devicetree/bindings/mtd/nand.txt
+++ b/Documentation/devicetree/bindings/mtd/nand.txt
@@ -3,5 +3,8 @@
- nand-ecc-mode : String, operation mode of the NAND ecc mode.
Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
"soft_bch".
+- nand-ecc-level : Two cells property defining the ECC level requirements.
+ The first cell represent the strength and the second cell the ECC block size.
+ E.g. : nand-ecc-level = <4 512>; /* 4 bits / 512 bytes */
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
--
1.7.9.5


\
 
 \ /
  Last update: 2014-01-29 16:21    [W:0.223 / U:2.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site