lkml.org 
[lkml]   [2014]   [Jan]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Query: Phy: How to find consumer device on dt platform
On Wed, Jan 29, 2014 at 10:24:35PM +0800, Arnd Bergmann wrote:
> On Wednesday 29 January 2014, Pratyush Anand wrote:
> > On Wed, Jan 29, 2014 at 01:41:56PM +0800, Kishon Vijay Abraham I wrote:
> > > >
> > > > I would instead recommend making the mode of the PHY device the
> > > > argument to the phy handle in DT, so that the sata node uses
> > > >
> > > > phys = <&phyA 0>;
> > > >
> > > > and the PCIe node uses
> > > >
> > > > phys = <&phyB 1>;
> > > >
> > > > Then the binding for the phy defines that an argument of '0' means sata mode,
> > > > while '1' means pcie mode, plus you should define all other valid modes.
> >
> > Probably, it may not help in this case. How would *phys* defining as
> > above with PCIe/SATA node help phy driver to decide whether current
> > phy instance is associated with PCIe or SATA. Actually, there is no
> > way to pass information from phy consumer driver(pcie/sata driver in
> > this case) to phy driver.
>
> I don't understand what is unclear about my example where I do just that.
> The argument (0 or 1) gets passed into the driver's xlate function
> when the consumer calls of_phy_get().

May be I did not understand this mechanism earlier.
I got it now.

Will do this way :)

Thanks for explaining it.

Regards
Pratyush

>
> > > Anyway phyA and phyB points to different nodes and just from phyA and phyB we
> > > should be able to tell whether it is sata or pcie.
> >
> > We have multiple instances (say 3) of same phy, which can be
> > programmed either for pcie or for sata. We have multiple instances of
> > ahci and pcie controller. phy_n will be connected to either ahci_n or
> > pcie_n.
> >
> > What Kishon has suggested here is exactly what I was thinking.
> > I think, we should go with this.
>
> I still find it highly inconsistent.
>
> Arnd


\
 
 \ /
  Last update: 2014-01-29 16:21    [W:0.042 / U:1.644 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site