lkml.org 
[lkml]   [2013]   [Sep]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv4] ARM: OMAP2+: am335x-bone*: add DT for BeagleBone Black
From
Date

Op 9 sep. 2013, om 16:15 heeft Felipe Balbi <balbi@ti.com> het volgende geschreven:

> Hi,
>
> On Mon, Sep 09, 2013 at 03:45:50PM +0200, Koen Kooi wrote:
>> The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added,
>> so create a common dtsi both can use.
>>
>> IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver
>> after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead
>> of 1.8.
>>
>> MMC support for AM335x still isn't in, so only the LDO change has been added.
>>
>> Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
>> Tested-by: Tom Rini <trini@ti.com>
>> Tested-by: Matt Porter <matt.porter@linaro.org>
>
> not entirelly related to $SUBJECT but having HDMI listed in BBB DTS will
> prevent the use of RF cape, no ?

Complete and utter lack of software from TI for the RF cape is preventing the RF cape from working regardless of HDMI entries.

\
 
 \ /
  Last update: 2013-09-11 02:41    [W:0.049 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site