lkml.org 
[lkml]   [2013]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v12 4/7] arm: omap3: twl: add phy consumer data in twl4030_usb_data
Date
The PHY framework uses the phy consumer data populated in platform data in the
case of non-dt boot to return the reference to the PHY when the controller
(PHY consumer) requests for it. So populated the phy consumer data in the platform
data of twl usb.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/mach-omap2/twl-common.c | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index c05898f..b0d54da 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -24,6 +24,7 @@
#include <linux/i2c/twl.h>
#include <linux/gpio.h>
#include <linux/string.h>
+#include <linux/phy/phy.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>

@@ -90,8 +91,18 @@ void __init omap_pmic_late_init(void)
}

#if defined(CONFIG_ARCH_OMAP3)
+struct phy_consumer consumers[] = {
+ PHY_CONSUMER("musb-hdrc.0", "usb"),
+};
+
+struct phy_init_data init_data = {
+ .consumers = consumers,
+ .num_consumers = ARRAY_SIZE(consumers),
+};
+
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,
+ .init_data = &init_data,
};

static int omap3_batt_table[] = {
--
1.7.10.4


\
 
 \ /
  Last update: 2013-09-27 08:41    [W:0.074 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site