lkml.org 
[lkml]   [2013]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[tip:x86/reboot] reboot: Allow specifying warm/ cold reset for CF9 boot type
Commit-ID:  16c21ae5ca636cfd38e581ebcf709c49d78ea56d
Gitweb: http://git.kernel.org/tip/16c21ae5ca636cfd38e581ebcf709c49d78ea56d
Author: Li Fei <fei.li@intel.com>
AuthorDate: Wed, 21 Aug 2013 16:13:57 +0800
Committer: Ingo Molnar <mingo@kernel.org>
CommitDate: Wed, 25 Sep 2013 19:33:22 +0200

reboot: Allow specifying warm/cold reset for CF9 boot type

In current implementation for reboot type CF9 and CF9_COND,
warm and cold reset are not differentiated, and both are
performed by writing 0x06 to port 0xCF9.

This commit will differentiate warm and cold reset:

For warm reset, write 0x06 to port 0xCF9;
For cold reset, write 0x0E to port 0xCF9.

[ hpa: This meaning of "cold" and "warm" reset is different from other
reboot types use, where "warm" means "bypass BIOS POST". It is also
not entirely clear that it actually solves any actual problem. However,
it would seem fairly harmless to offer this additional option.

Also note that we do not mask bit 3 in the "warm reset" case. This
preserves the behavior on existing systems, including ones quirked
to use CF9. It seems reasonable that on any system where the
warm/cold distinction actually matters that bit 3 would be read as
zero. ]

From: Liu Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Li Fei <fei.li@intel.com>
Link: http://lkml.kernel.org/r/1377072837.24556.2.camel@fli24-HP-Compaq-8100-Elite-CMT-PC
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
arch/x86/kernel/reboot.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 563ed91..ca42f63 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -511,10 +511,13 @@ static void native_machine_emergency_restart(void)

case BOOT_CF9_COND:
if (port_cf9_safe) {
- u8 cf9 = inb(0xcf9) & ~6;
+ u8 reboot_code = reboot_mode == REBOOT_WARM ?
+ 0x06 : 0x0E;
+ u8 cf9 = inb(0xcf9) & ~reboot_code;
outb(cf9|2, 0xcf9); /* Request hard reset */
udelay(50);
- outb(cf9|6, 0xcf9); /* Actually do the reset */
+ /* Actually do the reset */
+ outb(cf9|reboot_code, 0xcf9);
udelay(50);
}
reboot_type = BOOT_KBD;

\
 
 \ /
  Last update: 2013-09-25 19:41    [W:0.136 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site